Kathrein EXD 154 Bruksanvisning

Läs gratis den bruksanvisning för Kathrein EXD 154 (8 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 43 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4 recensioner. Har du en fråga om Kathrein EXD 154 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1 / 8

EXD 154

2050000003

Sat-IF Distribution System (4 x Sat-IF)

Digital Wideband Multi-switch

About This Manual

This document is part of the product.

►Do not install or use the device until you

have read and understood this document.

►Keep this document for reference throug-

hout the service life of the device and pass it

on to any new owner or user.

For the most up-to-date version of this docu-

ment, go to www.kathrein-ds.com.

Features

Universal multi-switch with automatic

operating mode detection. A standard TV or

16 receivers each can be operated in single

cable mode at each connection.

All types of signalling are supported and

automatically detected: 14/18 V 0/22 kHz

(legacy), DiSEqC™ 1.0, single cable stan-

dards according to EN 50494, as well as the

extended command set according to EN

50607 (SCD2 or JESS); PIN codes can also

be used in single cable operation.

Latest IC technology with full band captu-

ring ensures the best signal quality. The

inputs are broadband and can also be

operated with wideband LNBs (e.g. UAS

582). This means that a multi-feed system

can be implemented (for two LNBs, the TV

set must support either DiSEqC™ or the

single-cable standard).

QR code for user instructions

For indoor installation

The integrated AGC (Automatic Gain

Control) ensures that the Sat IF signals

have a constant output level and more

reserve in the distribution.

When all TV sets/receivers are switched

o, the multi-switch no longer consumes

any power. If Kathrein Power Saving is acti-

vated, the LNBs are also switched o.

suitable for DVB-T/T2

Wideband to Quatro mode:

In this case, the two inputs of the wideband

LNB are permanently connected to the four

outputs of the multi-switch. The outputs of

the EXD 154 behave like a Quatro LNB, so

that an additional standard multi-switch

can be connected.

The NCF 18 is a highly ecient, short-

circuit-proof switched-mode power supply

unit

Tip The QR code on the front of the

multi-switch will take you to our

website where you can download

these instructions:

111,6

134

148

159

2050000003

2 4

1 3

V low

V high

H high

Terr.

H low

18V

300mA max.

Pow er

Saving

Wideband

Universal

Wideband

Universal

ON

OFF

WB-Quatro

DC

42,5

Produktspecifikationer