Kensington UH1450P Bruksanvisning

Kensington datatillbehör UH1450P

Läs gratis den bruksanvisning för Kensington UH1450P (6 sidor) i kategorin datatillbehör. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Kensington UH1450P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

Kensington UH1450P USB-C Mobile Dock.

1. Plug the USB-C cable into an available USB-C port on your host device. The selected USB-C port should support both Alt Mode and Power Delivery.

2. Connect accessories and monitors.

Connect phones, mice, keyboards, thumb drives, printers, and hard drives using the two USB-A 3.2 Gen2 ports (10Gbps/5V/1.5A and 10Gbps/5V/0.9A) on the back of the dock.

Plug your ethernet cable into the 1Gbps Ethernet port for stable high-speed internet/intranet connectivity.

Connect monitors using the two DisplayPort 1.4++ ports on the front of the dock.

Connect an additional USB-C accessory using the USB-C 3.2 Gen2 port (10Gbps/5V/0.9A) located on the front of the dock.

To setup pass-through power, plug your host device’s USB-C power adapter into the USB-C PD port on the side of the dock. The USB-C power adapter must supply at least 85W of Power Delivery.