Kenwood Excelon CA-GRL14UT Bruksanvisning
Kenwood
motorcykel
Excelon CA-GRL14UT
Läs gratis den bruksanvisning för Kenwood Excelon CA-GRL14UT (2 sidor) i kategorin motorcykel. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Kenwood Excelon CA-GRL14UT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-GRL14UT
REAR METAL MESH SPEAKER GRILLES DESIGNED AND ENGINEERED
FOR 2014-UP HARLEY-DAVIDSON® ULTRA MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle®
and Tour-Pak® are trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
Rear Metal Mesh Speaker Grilles Installation
Instructions
Installation procedure
1. Ensure your ignition switch stays in the “OFF” position.
2. Remove the factory rear speaker grilles by unscrewing the 4 “Torx” screws on the front
of the grilles. With all 4 screws removed, the factory grilles will now come o the factory
rear speaker “pod”.
3. Set the new grilles in place, and using the factory screws removed earlier, secure the
grille to the “pod” so the screws also go through the mounting holes in the speakers.
NOTE: The factory rubber “nutserts” on the rear pod side can be nicky. It’s a good idea to
get all 4 grille screws “started” and then get each one snug. Gradually tighten each one
down making sure all 4 screws holding the grille down are secure.
NOTE: You can customize these grilles by carefully “breaking” the
adhesive that holds the trim and mesh together on the back side
of the grille. The trim is easily painted, and the metal mesh is thick
enough that it should not warp during powder coating, polishing,
chroming, or other similar processing.
NOTE: KENWOOD CA-GRL14UT grilles t 2014+ factory
rear speaker pods, the KENWOOD CA-POD14AC and
CA-POD14LC, and can also be used if installing speakers
in factory lower speaker adaptors for air-cooled bikes.
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/
Produktspecifikationer
| Varumärke: | Kenwood |
| Kategori: | motorcykel |
| Modell: | Excelon CA-GRL14UT |
Behöver du hjälp?
Om du behöver hjälp med Kenwood Excelon CA-GRL14UT ställ en fråga nedan och andra användare kommer att svara dig
motorcykel Kenwood Manualer
25 September 2025
motorcykel Manualer
- Hero
- Milwaukee
- KTM
- Husqvarna
- Danfoss
- Duke Fitness
- BMW
- NordicTrack
- Best Fitness
- GasGas
- Yamaha
- Honda
- Ducati
- Body Solid
- TVS
Nyaste motorcykel Manualer
16 September 2025
15 September 2025
15 September 2025
11 September 2025
9 September 2025
6 September 2025
6 September 2025
6 September 2025
5 September 2025
5 September 2025