Kenwood KPG-43U Bruksanvisning


Läs gratis den bruksanvisning för Kenwood KPG-43U (25 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om Kenwood KPG-43U eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/25
CABLE
SIMPLE GUIDE
PRECAUTIONS
The following product is exclusively for use with KENWOOD transceivers.
To prevent possible accidents and damages, do not attempt to use this product with
other types of transceivers.
ABOUT PRODUCT
USB PROGRAMMING INTERFACE CABLE
This product is the cable to connect KENWOOD transceivers and the PC.
Install the UART driver or USB driver from the supplied CD to the PC.
PROGRAMMING INTERFACE CABLE
This product is the cable to connect KENWOOD transceivers and the PC.
FILTERED CIGARETTE LIGHTER CORD
The cigarette lighter cable allows you to supply power to your transceiver
from the cigarette lighter of your automobile.
The cigarette lighter cable is equipped with a 2 A fuse. When the fuse
blows, replace it with a fuse of the same rating.
To cigarette
lighter socket
To transceiver
3.4 mm
Fuse (2A)
CAUTION:
12 V DC ONLY
Serious damage may result to your transceiver if this cable is connected to a voltage
source greater than 16 V. Some vehicles have battery voltages of 24 V or greater.
REMOTE CONTROL KIT
These products are the connection cable kits for installing the operation
panel of KENWOOD mobile transceivers separately.
B5A-1082-00
© 2015


Produktspecifikationer

Varumärke: Kenwood
Kategori: ej kategoriserat
Modell: KPG-43U

Behöver du hjälp?

Om du behöver hjälp med Kenwood KPG-43U ställ en fråga nedan och andra användare kommer att svara dig