Kern EG 600-3AM Bruksanvisning

Kern våg EG 600-3AM

Läs gratis den bruksanvisning för Kern EG 600-3AM (60 sidor) i kategorin våg. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Kern EG 600-3AM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/60

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Operating instruction

Precision balances

KERN EW/EG-N

Type EG 200-3AM

Type EG 400-3AM

Type EG 600-3AM

Type EG 2000-2AM

Type EG 4000-2AM

Version 3.1

2024-05

EW/EG-N-BA-e-2431

 
EW/EG-N-e-2431 

 
 
 
GB 
KERN EW/EG-N 
Version 3.1  2024-05 
Operating instruction 
Precision balances 
 
 
 
Table of contents 
Technical data ............................................................................................ 4 
1  Read-off of the various  weighing units ........................................................................... 10 
2  Weighing unit conversion charts ..................................................................................... 11 
Fundamental information (general) ........................................................ 12 
1  Intended use ....................................................................................................................... 12 
2  Inappropriate use ............................................................................................................... 12 
3  Guarantee............................................................................................................................ 12 
4  Monitoring the test substances ........................................................................................ 13 
Fundamental safety information ............................................................. 13 
1  Observe the information in the operating instructions .................................................. 13 
2  Staff training ....................................................................................................................... 13 
Transport and storage ............................................................................. 13 
1  Acceptance check .............................................................................................................. 13 
2  Packaging / return transport ............................................................................................. 13 
Unpacking, installation and commissioning.......................................... 14 
1  Place of installation, place of use .................................................................................... 14 
2  Unpacking ........................................................................................................................... 15 
2.1  Installation ............................................................................................................................ 15 
2.2  List of items supplied ............................................................................................................ 15 
2.3  Positioning the weighing plate ............................................................................................. 16 
2.4  Serial draft shield installation ............................................................................................... 17 
2.5  Draft shield installation – optional ........................................................................................ 18 
2.6  Draft shield with glass sliding doors  (only model KERN EW 120-4NM standard) .............. 18 
3  Mains supply ...................................................................................................................... 19 
4  Operation using a rechargeable battery (optional) ........................................................ 19 
5  Connecting peripheral equipment .................................................................................... 20 
6  Initial start-up ..................................................................................................................... 20 
6.1  Power display ....................................................................................................................... 20 
6.2  Bar graph display ................................................................................................................. 20 
6.3  Stability indication ................................................................................................................ 21 
6.4  Zero display on the balance ................................................................................................. 21 
7  Adjustment.......................................................................................................................... 22 
8  Adjusting ............................................................................................................................. 22 
8.1  Adjusting with externall weight (only KERN EW-N) ............................................................. 22 
8.2  Adjusting with internal weight (only KERN EG) ................................................................... 22 
8.3  Adjusting with external weight (only KERN EW) .................................................................. 24 
9  Verification .......................................................................................................................... 26 
10  Verification switch and official seal ................................................................................. 27 
Operation .................................................................................................. 28 
1  Operating elements ............................................................................................................ 28 
1.1  Overview of the keypad ........................................................................................................ 29 
1.2  Overview of display .............................................................................................................. 30 
2  Operation ............................................................................................................................ 31 
2.1  Weighing .............................................................................................................................. 31 
2.1.1  Underfloor weighing ............................................................................................................................ 32 
2.1.2  Tare weighing (tare) ........................................................................................................................... 33 