Kern FL 2K Bruksanvisning
Läs gratis den bruksanvisning för Kern FL 2K (21 sidor) i kategorin mätning. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Kern FL 2K eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/21
FL- -e-2020.docx BA
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49- [0]7433- -0 9933
Fax: +49- [0]7433-9933- 149
Internet: www.sauter.eu
Instruction manual digital force
gauge
SAUTER FL
Version 2.0
01/2020
GB
PROFESSIONAL MEASURING
2 - -e-2020.docx FL BA
GB
SAUTER FL
V. 2.0 01/2020
Instruction manual digital force gauge
Congratulations on purchasing a digital force measuring device with internal or external
measuring cell from SAUTER. We hope you will enjoy your quality measuring device
with a wide range of functions. Please do not hesitate to contact us if you have any
questions, requests or suggestions.
Table of contents:
1 Introduction .....................................................................................................3
2 Scope of delivery ........................................................................................... 3
3 Additional information when using the AFH software ................................ 3
4 Technical data ................................................................................................ 4
4.1 Technical data FL with internal loadcell up to 1 kN............................................................... 4
4.2 Technical data FL with external loadcell from 2kN ............................................................... 5
4.3 Technical data external load cell (from 2kN) ......................................................................... 6
4.4 Technical Data FL TM 7...............................................................................................................
5 Battery indicator / power supply .................................................................. 8
6 Display indication .......................................................................................... 8
7 Control buttons .............................................................................................. 9
8 Functions ...................................................................................................... 10
8.1 Limit value display Good / Bad ............................................................................................. 10
8.2 Invert display .......................................................................................................................... 10
8.3 Store measured value in memory ......................................................................................... 10
8.4 Memory / Storage ................................................................................................................... 11
8.5 Diagnostics ............................................................................................................................. 12
8.6 Select Output .......................................................................................................................... 12
9 Computer control of the force gauge ......................................................... 13
10 RS232 output signal .................................................................................... 13
10.1 Interface protocol ................................................................................................................... 14
10.2 Assignment of the RS232 data interface .............................................................................. 14
11 Warnings ...................................................................................................... 15
12 Adjustment instruction FL .......................................................................... 17
13 Technical drawings ...................................................................................... 21
FL- -e-2020.docx 3 BA
1 Introduction
Please read these operating instructions carefully before commissioning, even if you
already have experience with SAUTER measuring instruments.
After receipt of the force gauge, it should be checked in advance that no transport
damage has occurred, that the outer packaging, the plastic housing, other parts or
even the gauge itself have not been damaged. If any damage is evident, please
notify SAUTER GmbH immediately.
The FL can measure tensile and compressive forces very accurately and it is easy to
operate. It can be held in the hand for measurements or mounted on top of a suitable
test stand.
SAUTER oers optional software and accessories to make the measuring instrument
more versatile in use. Please ask SAUTER or the SAUTER supplier or visit our
website www.sauter.eu.
2 Scope of delivery
• SAUTER , incl. internal battery FL
• Transport case
• Battery charger
• 5 pieces M3 x 8 screws for mounting on SAUTER test benches
3 Additional information when using the AFH software
If you want to connect an FL with the combination test bench and software (AFH-LD
or AFH-FD) to a , you must connect the FL to the equipment port of the test bench PC
via the FL-A04 cable (Sub-D 9-pin to PS2) and connect the test bench to the PC via
the computer port.
Produktspecifikationer
| Varumärke: | Kern |
| Kategori: | mätning |
| Modell: | FL 2K |
Behöver du hjälp?
Om du behöver hjälp med Kern FL 2K ställ en fråga nedan och andra användare kommer att svara dig
mätning Kern Manualer
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
mätning Manualer
- Dasqua
- Owon
- Testboy
- Kübler
- PCE Instruments
- PeakTech
- Steinberg
- Klein Tools
- Mitsubishi
- Greisinger
- Ermenrich
- Teslong
- Testo
- Schneider
- Chauvin Arnoux
Nyaste mätning Manualer
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025