Kidde KI-PD Bruksanvisning

Kidde Rökdetektor KI-PD

Läs gratis den bruksanvisning för Kidde KI-PD (4 sidor) i kategorin Rökdetektor. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 7.5 recensioner. Har du en fråga om Kidde KI-PD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

04-08-18

Page 1 of 4 DATA SHEET K85001-0646

Not to be used for installation purposes. Issue 1

KIDDE

Catalog  Intelligent Initiating Devices

Technology that saves lives

Intelligent Smoke

Detector

KI-PD

Overview

The KI-PD optical smoke detector brings advanced sensing

technology to a practical design that increases efﬁciency, saves

installation time, cuts costs, and extends life safety and property

protection capabilities. Continuous self-diagnostics ensure reli-

ability over the long-haul, while environmental compensation helps

reduce maintenance costs.

Like all KI Series detectors, the KI-PD is an intelligent device that

gathers analog information from its optical sensor, converting this

data into digital signals. To make an alarm decision, the detector’s

on-board microprocessor measures and analyzes sensor read-

ings and compares this information to historical data. Digital ﬁlters

remove signal patterns that are not typical of ﬁres, thus virtually

eliminating unwanted alarms.

Standard Features

Note: Some features described here may not be supported by

all control systems. Check your control panel’s Installation and

Operation Guide for details.

• Next generation optical smoke sensing technology

• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration

• Uses Existing Wiring

• Automatic Device Mapping

• Up To 250 Total Addresses Per Loop

• Two Levels of Environmental Compensation

• Two Levels of Dirty Detector Warning

• Twenty Pre-Alarm Settings

• Five Sensitivity Settings

• Non-Volatile Memory

• Electronic Addressing

• Identiﬁcation of Dirty or Defective Detectors

• Automatic Day/Night Sensitivity Adjustment

• Bicolor (Green/Red) Status Led

• Standard, Relay, Fault Isolator, and Audible Mounting Bases

• Sensor Markings Provide Easy Testing Identiﬁcation

S853

Compatible with VS & VM control systemsCompatible with VS & VM control systems

Produktspecifikationer

Varumärke:	Kidde
Kategori:	Rökdetektor
Modell:	KI-PD
Maximal räckvidd:	12.35 m
Trådlösa anslutningar:	Ja
Detektortyp:	Kolmonoxiddetektor
Produktens färg:	Vit
Förpackningstyp:	Låda
Antal per förpackning:	1 styck
Enkel installation:	Ja
Temperatur vid drift:	0 - 49 ° C
Temperaturintervall (förvaring):	-20 - 60 ° C
Intervall för relativ operativ luftfuktighet:	0 - 93 %
Material, hölje:	Plast
Placeringar som kan användas:	horisontell
Anslutningsteknologi:	Kabel
Monteringssätt:	Ytmonterad
Strömkälla:	AC
Bästa användningsområden:	Home, Office
Hopkopplingsbara:	Ja