Kidde SLED177i Bruksanvisning


Läs gratis den bruksanvisning för Kidde SLED177i (13 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 18 recensioner. Har du en fråga om Kidde SLED177i eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/13
ATTENTION! The model SLED177i strobe light is designed to notify hearing impaired
individuals of impending danger. The strobe light has no detection means and MUST be
used in conjunction with operating and interconnected Smoke, Heat, or Carbon
Monoxide Alarms.
The model SLED177i AC wire-in Strobe light can be directly interconnected with Kidde
Safety 3-wire Smoke, Heat and CO alarms. It will produce an intermittent strobe flash
pattern (approximately 4 flashes, followed by approximately 5 seconds off) when trig-
gered by a Carbon Monoxide alarm and a flash every second when triggered by a
smoke or heat alarm.
Thank you for purchasing this strobe light. It is an important part of your family’s home
safety plan. You can trust KIDDE Safety to provide the highest quality safety products.
We know you expect nothing less when the lives of your family are at stake.
For model: SLED177i
1102-7201-00
Strobe
Light
For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Strobe Light Model Number
(located on back of alarm):
Date Code (located on back of device):
Date of Purchase:
Where Purchased:
SLED177i
Strobe Light User Guide
1102-7201-00_Rev.A_EN_V8:_ 2013.5.28 9:45 AM Page 1


Produktspecifikationer

Varumärke: Kidde
Kategori: Inte kategoriserad
Modell: SLED177i

Behöver du hjälp?

Om du behöver hjälp med Kidde SLED177i ställ en fråga nedan och andra användare kommer att svara dig