Kincrome Smart Tyre Gauge K8310 Bruksanvisning
Kincrome
Inte kategoriserad
Smart Tyre Gauge K8310
Läs gratis den bruksanvisning för Kincrome Smart Tyre Gauge K8310 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 15.5 recensioner. Har du en fråga om Kincrome Smart Tyre Gauge K8310 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
SMART TYRE GAUGE
QUICK START GUIDE
NOTES
The gauge will shut off automatically.There are no user serviceable parts. Tyre pressure for your vehicle can
be found on the driver side door jam or in the owner’s manual.
HOW TO MEASURE TYRE PRESSURE
1. Ensure the vehicle is stationary prior to measuring tyre pressure
2. Press button to turn the Smart Tyre Gauge ON
3. Remove the Dust Cap off the tyre valve, make sure the valve is free of debris, then push the Smart Tyre Gauge onto the tyre
valve, make sure a good seal is made between the nozzle and valve stem so that no hissing sound of escaping air can be heard.
4. The Smart Tyre Gauge will automatically display the current tyre pressure
5. The Smart Tyre Gauge will turn OFF
CAUTION
Keep the unit dry – water or other liquids may damage the electronic components inside.
HOW TO SAVE TYRE PRESSURE READINGS
1. The Smart Tyre Gauge can save up to 4 tyre pressure readings
2. Simply press to record the tyre pressure reading
3. Press to select another position to record your reading
HOW TO TURN THE LED LIGHT ON/OFF
1. Turn the unit on via the button
2. Once the unit is on, simply press to turn the light ON/OFF
DEFLATING TYRES
1. Turn the unit ON via the button
2. Remove the dust cap from the tyre valve, and push the Smart Tyre Gauge onto the tyre valve
3. Press and hold the button located on the underside of the Smart Tyre Gauge, until your desired tyre pressure is reached.
CHANGING THE BATTERIES
1. Remove the 3 screws on the underside of the Smart Tyre Gauge and place the cover aside
2. Remove the 2 x CR2032 Batteries, making note of which way they are installed
3. Install 2 x New CR2032 batteries
4. Reinstall the back cover & install the 3 screws
SPECIFICATIONS
• 3 Measurement modes (psi, bar, kg²)
• Measurement range: 5 to 100 psi
• Operating temperatures: -20°C to 50°C
• Powered by 2 X CR2032 button batteries (included)
• Auto turn OFF feature: Yes (30 Seconds)
• Product dimensions: 153 x 35 x 35mm
• Weight: 80g
Office Contact Details
Phone: 1300 657 528
Fax: 1300 556 005
Email: enquiries@kincrome.com.au
Website: www.kincrome.com.au
Caring For The Environment
When a tool is no longer usable it should not be disposed of with household
waste, but in an environmentally friendly way. Please recycle where facilities
exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse
of recycled material decreases pollution in the environment. Please recycle
packaging where facilities exist. Check with your local council authority for
recycling advice.
Warranty given by Kincrome Australia Pty Ltd of Lakeview Drive, Carribbean Park, Scoresby, Victoria, Australia
(Tel +61 3 9730 7100) If this product has materials or workmanship defects (other than defects caused by
abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised
Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this
warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable
laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. For further details please visit www.kincrome.com.
au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ
from the one shown on the packaging.
Made to Kincrome Tools & Equipment Pty Ltd global
specifications and quality standards in China
Australia & Global
www.kincrome.com.au
enquiries@kincrome.com.au
K8310
MONTH
WARRANTY
12
Produktspecifikationer
| Varumärke: | Kincrome |
| Kategori: | Inte kategoriserad |
| Modell: | Smart Tyre Gauge K8310 |
Behöver du hjälp?
Om du behöver hjälp med Kincrome Smart Tyre Gauge K8310 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Kincrome Manualer
19 September 2024
19 September 2024
19 September 2024
Inte kategoriserad Manualer
- Laurastar
- Zipper
- ENDORFY
- Indiana Line
- Cyber Acoustics
- Xcellon
- Echo
- Arthur Martin
- Coline
- Versare
- Hawke
- Smoby
- Nexxt
- Dynavox
- Minuteman
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025