KINGrinder K0 Bruksanvisning
Läs gratis den bruksanvisning för KINGrinder K0 (4 sidor) i kategorin kaffekvarn. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om KINGrinder K0 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Wh
KINGRINDER
MANUAL HAND
COFFEE GRINDER
WHAT’S IN THE BOX
Grinder
Handle
PC Lid with Black O-ring
Brush
KINGRINDER
MANUAL HAND
COFFEE GRINDER
MANUAL
MODLE: K0/K1/K2
There may be different versions; pictures are for reference only.
Brewing methods
K0
K1
K2
Turkish coffee
Not recommended
20 clicks
20 clicks
Espresso
Not recommended
40 clicks
40 clicks
Moka pot
AeroPress
60 clicks
60 clicks
60 clicks
Pour-Over
100 clicks
100 clicks
100 clicks
French Press
140 clicks
140 clicks
140 clicks
HOW TO OPERATE THE GRINDER?
Remove the receiver. Position and ascontinue to hold the grinder
demonstrated in the image for the subsequent steps.
1.
Rotate the spin dial ; do not overtighten
clockwise until there is resistance
the part.
2.
Rotate the spin dial to the recommended grinding clicks
counterclockwise
(Please refer to the table below).
3.
Tighten the receiver and remove the handle. Place 20~25g of coffee beans
on the grinder.
4.
Reattach the handle and start grinding.5.
RECOMMENDED GRINDER SETTINGS
※One round is equivalent to 40 clicks.
※For reference only; adjustments may be made according to personal preference.
PRECAUTIONS:
HOW TO CLEAN THE GRINDER?
Remove the receiver, attach the handle to the grinder, and continue to hold
the grinder as demonstrated in the image for the subsequent steps.
1.
Rotate the spin dial to disassemble the grinder.2. counterlockwise
Take out the components in order: spin dial, numerical dial, inner burr,
spring, and bearing cover. ※Note: No need to remove the central shaft.
3.
Use the brush to clean the grinder.4.
Place the components back in order: bearing cover and spring. There are two
shapes of the bearing cover: flat design and curved design. Ensure the curved
design faces upward.
5.
Attach the inner burr and the numerical dial to the rectangle shape of the
central shaft to proceed with the grinder assembly.
6.
Install the spin dial and rotate clockwise to complete the assembly.7.
The entire grinder Please use the brush for
should not be washed with water.
cleaning.
1.
Do not rotate the handle when the grind setting is , as
at 0 or below 16 clicks
this could damage the burr set.
2.
For precision reasons, do not dismantle the exterior burr. Avoid forcefully
disassembling the grinder with tools.
3.
Only grind coffee beans. Do not grind unroasted coffee beans. 4.
Avoid spraying water directly onto any part of the grinder. You can perform RDT
by spraying water on another object.
5.
Avoid second grinding as the coffee fine powder may block the parts.6.
Please store in a dry environment.7.
Produktspecifikationer
| Varumärke: | KINGrinder |
| Kategori: | kaffekvarn |
| Modell: | K0 |
Behöver du hjälp?
Om du behöver hjälp med KINGrinder K0 ställ en fråga nedan och andra användare kommer att svara dig
kaffekvarn KINGrinder Manualer
3 Januari 2025
3 Januari 2025
3 Januari 2025
3 Januari 2025
27 September 2024
27 September 2024
kaffekvarn Manualer
- Koenic
- Alpina
- Chefman
- Kitchenbrothers
- Krups
- Moulinex
- Russell Hobbs
- OBH Nordica
- Maestro
- Lenoxx
- Suntec
- Eldom
- Blokker
- Ecm
- Orava
Nyaste kaffekvarn Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
14 Juni 2025
11 Juni 2025
8 Juni 2025
7 Juni 2025
5 Mars 2025
14 Februari 2025