KitchenAid MKC2157AS Bruksanvisning
KitchenAid
Magnetron
MKC2157AS
Läs gratis den bruksanvisning för KitchenAid MKC2157AS (12 sidor) i kategorin Magnetron. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om KitchenAid MKC2157AS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
MICROWAVE OVEN BUILT-IN TRIM KIT
INSTALLATION INSTRUCTIONS
Built-In Trim Kit Models MKC2157, MKC2150
UL listed for use over any electric or gas built-in oven, up to 30" (76.2 cm) wide
INSTRUCTIONS D’INSTALLATION
GARNITURE ENCASTRÉE POUR FOUR À MICRO-ONDES
Garniture encastrée pour modèles MKC2157, MKC2150
Homologation UL pour utilisation au-dessus de tous les fours encastrés électriques ou gaz, jusqu’à 30" (76,2 cm) de largeur
MICROWAVE OVEN SAFETY
Table of Contents / Table des matières
MICROWAVE OVEN SAFETY....................................................... 1
INSTALLATION INSTRUCTIONS ................................................. 2
Tools and Parts ........................................................................... 2
Location Requirements............................................................... 2
Required Cutout Dimensions...................................................... 2
Trim Kit Frame Dimensions ........................................................ 2
Electrical Requirements .............................................................. 3
Prepare Microwave Oven ........................................................... 3
Prepare Cutout/Cabinet Opening............................................... 4
Install the Microwave Oven......................................................... 5
Install Trim Kit Frame.................................................................. 6
SÉCURITÉ DU FOUR À MICRO-ONDES .......................................... 7
INSTRUCTIONS D’INSTALLATION ................................................... 7
Outillage et pièces ............................................................................ 7
Exigences d'emplacement ............................................................... 7
Dimensions nécessaires de l'ouverture d'encastrement................. 8
Dimensions du cadre de la trousse de garniture ............................. 8
Spécifications électriques ................................................................ 8
Préparation du four à micro-ondes .................................................. 9
Préparation de l'ouverture d’encastrement/dans le placard ......... 10
Installation du four à micro-ondes ................................................. 11
Installation du cadre de garniture................................................... 12
W10694207A
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
2
INSTALLATION INSTRUCTIONS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied (not shown to scale
Location Requirements
The microwave oven may be installed over a built-in oven. If
installing over a built-in oven, make sure there is a minimum of 3"
(7.6 cm) between the top of the lower oven cutout and the
microwave oven cutout floor.
The microwave oven may also be installed in a cabinet by itself
(without a built-in oven below). For best usability, we recommend
a minimum distance of 36" (91.4 cm) from the floor to the cutout
floor.
Make sure the surrounding cabinetry has clearance to open and
close freely. Allow a clearance of at least 1⁹⁄₁₆" (4.0 cm) below the
cutout floor (3" [7.6 cm] for installation above a built-in oven), and
a clearance of at least 2" (5.1 cm) above the cutout opening.
Required Cutout Dimensions
NOTES:
■ Depth requirements depend upon receptacle and its location
within or outside of recommended region. See illustration and
chart above.
■ Height dimension is critical: 17" (43.2 cm) minimum, 17¹⁄₈"
(43.5 cm) maximum.
■Width measurement has ±1/16" (2 mm) tolerance.
■ 3" (7.6 cm) minimum dimension is from lower oven cutout
ceiling to microwave oven cutout floor.
■Trim kit frame extends 1¹⁄₁₆" (2.7 cm) above and below the
cutout opening.
Trim Kit Frame Dimensions
*27" (68.6 cm) trim kit
**30" (76.2 cm) trim kit
■ Measuring tape
■ Pencil
■ Phillips screwdriver
■ Drill
■ 7/64" drill bit
Rear duct Bottom duct Rails (2)
Short screws (19)
(16 + 3 extra)
Long wood screws
(6 - painted) (4 + 2 extra)Trim kit frame
A. Upper cabinet
B. Microwave oven cutout
C. Lower oven cutout
D. Lower cabinets
E. Floor
3"
(7.6 cm)
BB
D
36"
(91.4 cm)
C
2"
(5.1 cm)
2"
(5.1 cm)
1 "⁹⁄₁₆
(4.0 cm)
A
E
A. Trim kit frame overhang
B. Cutout for lower oven
C. Recommended region for receptacle
location (no less than 7" [17.8 cm] to
the right of cutout centerline)
D. Cutout centerline
Receptacle Location Minimum Depth
Within recommended
region
20" (50.8 cm) with flush receptacle;
22" (55.9 cm) with non-flush receptacle
Outside recommended
region
22" (55.9 cm) with flush receptacle;
24" (61.0 cm) with non-flush receptacle
3"
(7.6 cm)
7"
(17.8 cm)
A
1 "¹⁄₁₆
(2.7 cm)
1 "¹⁄₁₆
(2.7 cm)
B
CD
23¹⁄₈" (58.7 cm)17 " (43.5 cm)¹⁄₈
max.
17" (43.2 cm)
min.
For minimum depth requirements, see chart.
26⁷⁄₈" (68.2 cm)**
29³⁄₄" (75.6 cm)**
2 " (5.2 cm)*¹⁄₁₆
*
3¹⁄₂" (8.9 cm)**
22 " (57.8 cm)³⁄₄
12¹⁄₄
"
(31.1 cm
)
1 " (3.0 cm)³⁄₁₆
19 "¹⁄₈
(48.6 cm)
3⁷⁄₁₆"
(8.7 cm)
3
Electrical Requirements
Observe all governing codes and ordinances.
Required:
■ A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
Recommended:
■ A time-delay fuse or time-delay circuit breaker.
■ A separate circuit serving only this microwave oven.
Prepare Microwave Oven
Attach Rails
1. Unplug microwave oven before proceeding with installation.
2. Remove any loose items inside microwave oven.
3. Gently turn microwave oven onto its top, with the door facing
forward (toward installer).
4. Align the two rails on the microwave oven bottom, as shown,
making sure the flanges are forward and pointing up.
5. Secure the rails to the microwave oven bottom using four
short screws.
Attach Rear Duct
1. Gently return microwave oven to its upright position.
2. Align the rear duct with the back of microwave oven, as
shown.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
GROUNDING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■ For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING: Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
A. Rails (2)
B. Microwave oven bottom
C. Short screws (4)
D. Flanges
E. Door
A B C
D E
Produktspecifikationer
| Varumärke: | KitchenAid |
| Kategori: | Magnetron |
| Modell: | MKC2157AS |
| Färg på produkten: | Zwart |
| Vikt: | 7400 g |
| Bredd: | 163 mm |
| Djup: | 350 mm |
| Höjd: | 340 mm |
| Processorfrekvens: | 2.8 GHz |
| Processorfamilj: | Intel® Core™ i5 |
| Processormodel: | i5-8400 |
| Antal processorkärnor: | 6 |
| Wi-Fi-standarder: | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Inkluderar operativsystem: | Windows 10 Home |
| Placeringsstöd: | Verticaal |
| Ethernet LAN: | Ja |
| Integrerad minneskortläsare: | Ja |
| Processor litografi: | 14 nm |
| Antal USB 2.0-portar: | 4 |
| VGA (D-Sub) port(ar): | 1 |
| Antal HDMI-portar: | 1 |
| Mikrofon, linjeingång: | Ja |
| Antal Ethernet LAN (RJ-45)-portar: | 1 |
| Hörlursutgångar: | 1 |
| Nätförsörjning: | 300 W |
| Internminne: | 12 GB |
| Förvarings media: | HDD |
| Internminnestyp: | DDR4-SDRAM |
| Hållbarhetscertifikat: | RoHS |
| WiFi-standard: | Wi-Fi 5 (802.11ac) |
| Ethernet LAN, dataöverföringshastigheter: | 10,100,1000 Mbit/s |
| Kabelteknik: | 10/100/1000Base-T(X) |
| Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A: | 2 |
| Processoruttag: | LGA 1151 (Socket H4) |
| Systembuss: | 8 GT/s |
| Processor antal trådar: | 6 |
| PCI Express-kortplatsversion: | 3.0 |
| Processorns driftlägen: | 64-bit |
| Processorns cache: | 9 MB |
| Tjunction: | 100 °C |
| Busstyp: | DMI3 |
| PCI Express-konfigurationer: | 1x16, 1x8+2x4, 2x8 |
| Thermal Design Power (TDP): | 65 W |
| Kodnamnsprocessor: | Coffee Lake |
| Maximalt antal PCI Express-linjer: | 16 |
| Typ av processorcache: | Smart Cache |
| ECC stöds av processor: | Nee |
| Processorfabrikant: | Intel |
| Operativsystems arkitektur: | 64-bit |
| Maximalt internminne: | 32 GB |
| Total lagringskapacitet: | 1000 GB |
| Typ av optisk enhet: | DVD±RW |
| Inbyggd grafikadapter: | Ja |
| Separat grafikadapter: | Nee |
| Familjens inbyggda grafikadapter: | Intel® UHD Graphics |
| Inbyggd grafikadaptermodell: | Intel® UHD Graphics 630 |
| Grundläggande frekvens inbyggd grafikadapter: | 350 MHz |
| Inbyggd grafikadapter dynamisk frekvens (max): | 1050 MHz |
| Inbyggt grafikkort-ID: | 0x3E92 |
| Maximalt minne inbyggd grafikadapter: | 64 GB |
| Inbyggd grafikadapter DirectX-version: | 12.0 |
| Inbyggd grafikadapter OpenGL version: | 4.5 |
| Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ C: | 1 |
| Instruktionsuppsättningar som stöds: | AVX 2.0, SSE4.1, SSE4.2 |
| Intel® Hyper Threading Technology (Intel® HT Technology): | Nee |
| Intel® Turbo Boost-teknik: | 2.0 |
| Intel® Quick Sync-videoteknik: | Ja |
| Intel® InTru™ 3D-teknik: | Ja |
| Intel® Clear Video HD-teknik (Intel® CVT HD): | Ja |
| Intel® AES nya instruktioner (Intel® AES-NI): | Ja |
| Förbättrad Intel SpeedStep-teknik: | Ja |
| Kör Disable Bit: | Ja |
| Idle stater: | Ja |
| Termisk övervakningsteknik: | Ja |
| CPU-konfiguration (max): | 1 |
| Intel® Enhanced Halt State: | Ja |
| Intel® Clear Video Technology för mobila internetenheter (Intel® CVT för MID): | Ja |
| Intel® VT-x med utökade sidtabeller (EPT): | Ja |
| Inbyggda alternativ tillgängliga: | Nee |
| Intel® Secure Key: | Ja |
| Intel® 64: | Ja |
| Intel® OS Guard: | Ja |
| Intel® Virtualization Technology for Directed I/O (VT-d): | Ja |
| Intel® Clear Video-teknik: | Ja |
| Intel® Software Guard Extensions (Intel® SGX): | Ja |
| Intel® Virtualization Technology (VT-x): | Ja |
| Processorpaketstorlek: | 37.5 x 37.5 mm |
| Konfliktfri processor: | Ja |
| Intel® Identity Protection Technology (Intel® IPT): | Ja |
| Versie Intel® Identity Protection Technology: | 1.00 |
| Versie Intel® Secure Key Technology: | 1.00 |
| ARK ID-processor: | 126687 |
| Intel® Trusted Execution Technology: | Nee |
| Intel® TSX: | Nee |
| Intel® Stable Image Platform Program (SIPP): | Nee |
| Versie Intel® Stable Image Platform Program (SIPP): | 0.00 |
| Intel® TSX-NI-version: | 0.00 |
| Tangentbord ingår: | Ja |
| Maximal processorturbofrekvens: | 4 GHz |
| Diskret grafikadaptermodell: | Niet beschikbaar |
| Inkluderar mus: | Ja |
| Bostadstyp: | Desktop |
| Maximalt internminne som stöds av processorn: | 64 GB |
| Minnestyper som stöds av processorn: | DDR4-SDRAM |
| Klockminneshastigheter som stöds av processorn: | 2666 MHz |
| Minnesplatser: | 2x DIMM |
| Antal skärmar som stöds (av inbyggd grafikadapter): | 3 |
| Antal installerade processorer: | 1 |
| Minnesbandbredd som stöds av processorn (max): | 41.6 GB/s |
| Antal lagringsenheter installerade: | 1 |
| Linjeutgång: | Ja |
| Linjeingång: | Ja |
| Inkluderar monitor: | Nee |
| Skalbarhet: | 1S |
| Specifikation för termisk lösning: | PCG 2015C |
| Antal bearbetningsenheter: | 23 |
| Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A: | 1 |
| Hårddiskar med total kapacitet: | 1000 GB |
| Antalet installerade hårddiskar: | 1 |
| HDD kapacitet: | 1000 GB |
| HDD-gränssnitt: | SATA III |
| HDD rotationshastighet: | 7200 RPM |
| PCI Express x1-platser: | 1 |
| PCI Express x16-platser: | 1 |
| Minneskanal: | Dubbelkanaals |
| Wifi: | Ja |
| Typ produkt: | PC |
| Processorgenerering: | Intel® 8de generatie Core™ i5 |
Behöver du hjälp?
Om du behöver hjälp med KitchenAid MKC2157AS ställ en fråga nedan och andra användare kommer att svara dig
Magnetron KitchenAid Manualer
1 April 2025
11 Februari 2025
8 Januari 2025
17 Oktober 2024
6 Oktober 2024
28 September 2024
26 September 2024
25 September 2024
21 September 2024
18 September 2024
Magnetron Manualer
- Westinghouse
- Zelmer
- Dacor
- Nabo
- Malmbergs
- Toshiba
- Hotpoint-Ariston
- Bertazzoni
- Caple
- Nec
- Cosmo
- Scholtes
- Farberware
- Saro
- MPM
Nyaste Magnetron Manualer
9 April 2025
9 April 2025
7 April 2025
7 April 2025
6 April 2025
6 April 2025
6 April 2025
5 April 2025
5 April 2025
5 April 2025