Klark Teknik Air Link DW 20R Bruksanvisning

Klark Teknik mottagare Air Link DW 20R

Läs gratis den bruksanvisning för Klark Teknik Air Link DW 20R (2 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 15 recensioner. Har du en fråga om Klark Teknik Air Link DW 20R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Getting Started

1. Connect the DW 20T inputs to an original audio source such as a mixer or media player, then connect the outputs of the DW 20R to a destination such as a mixer, ampli er,

or active speaker. Leave the amp or speakers turned o for now.

2. Connect the power adapters to each unit. They will power on automatically and their PAIR buttons will blink slowly to indicate standby mode.

3. Press and hold the PAIR button on the DW 20T for 4 seconds. The LED ring will  ash rapidly to indicate that it is trying to pair, and will continue trying for up to 30 seconds.

4. Within 30 seconds of initiating the DW 20T for pairing, press and hold the PAIR button on the DW 20R for 4 seconds as well. Its LED ring will  ash rapidly.

5. When successfully paired, the LED rings on both the 20T and 20R will light solid (not  ashing). If either unit’s LED ring  ashes slowly, this indicates that pairing was unsuccessful.

Make sure both units are free of obstructions and are within 100 feet / 30 meters of each other.

6. After all audio and power connections have been made, power on the ampli er or active speakers.

Pairing multiple DW 20R units with a DW 20T

1. Connect the DW 20T and the  rst DW 20R as described in ‘Getting Started’ (hold each PAIR button for 4 seconds).

2. On the second DW 20R unit, hold the PAIR button for 4 seconds to activate pairing, then let it search for 30 seconds. The pairing function will time out after 30 seconds and the LED

will blink slowly.

3. Press the DW 20T PAIR button for 4 seconds, and then press the second DW 20R unit’s PAIR button for 4 seconds. Both DW 20R units will now be connected to the same DW 20T.