Klipsch Reference RF-83 Bruksanvisning

Klipsch högtalare Reference RF-83

Läs nedan 📖 manual på svenska för Klipsch Reference RF-83 (23 sidor) i kategorin högtalare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/23

English

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wider blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused

for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present within

this unit.

WARNING: To reduce the risk of fire or electrical shock, do not

expose this a tus to rain or moisture.ppara

WARNING: Voltages in this equipment are hazardous to life.

No user-serviceable parts inside. Refer all servicing to qualified

service personnel.

CAUTION: Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate.

UNPACKING

All Models

• Open one end of the carton, invert the speaker and pull the

carton off of the loudspeaker. (See Figure 1.)

• Remove all inner packing, including plastic bags, and re-install

the grille on the front of the cabinet.

Inspect the loudspeaker for shipping damage. If damage has

occurred, notify your Klipsch dealer or the responsible transit

company. Retain all packaging for future use.

Floorstanding Models

Floorstanding models are supplied with foot spikes to enhance

performance on carpeted floors.

• Invert the speaker on a carpeted surface and screw the spikes

into the threaded bushings in the bottom of the feet. Use

caution when turning the speaker upright as the spikes are

sharp! (See Figure 2.)

• Use an assistant to lift the speaker into position.

• Adjust individual spike length to level the speaker after

positioning.

Bookshelf, Center and Surround Models

These models are supplied with self-stick rubber feet to prevent

surface damage. (See Figure 2 for proper application.)

ROOM PLACEMENT

Your Reference loudspeakers will perform well in a variety of

loca ollowingtions, but best results will be achieved using the f

guidelines:

Front Left and Right Speakers (See Figures 3 and 4.)

• Place on a common wall 6 to 15 feet apart.

• If used in a home theater system, position the speakers

flanking your video display.

• Position them equidistant from the back wall.

• Postition them at the same height above the floor (for non-floor

standing models) with the high frequency drivers at seated

ear height.

• Angle speakers toward the listener and even with or forward of

any adjacent obstructions.

• Placing them near a corner or wall provides the greatest

amount of bass while moving the speakers away from room

boundaries reduces bass energy.

• Asymmetrical placement of a pair of speakers from adjacent

side walls can smooth room-induced bass unevenness.

• Bookshelf models may be placed on shelves or optional floor

stands.

• Experiment with the above guidelines to suit your taste and to

compensate for your room's acoustic characteristics.

Center Channel Speakers (See Figures 3 and 4.)

• Place immediately above or below the center of your video

display.

• These models are supplied with a tilt rod to compensate for

placements above or below seated ear height.

• Use the supplied self-stick rubber pads to cover the threaded

bushing holes (2) if the tilt rod is not used. (See Figure 2.)

Surround Channel Speakers (See Figures 3 and 4.)

• Place above seated ear height (5 to 7 feet above the floor) on

side or rear walls.

• Use the attached wall bracket to hook to an appropriately sized

screw head screwed into a wall stud or wall anchor with a

suitable weight bearing capacity. (See Figure 4.)

• See your Klipsch dealer for optional, adjustable wall mounts if

required. These mounts utilize the threaded bushings on the

rear of the cabinet.

Caution! Never use the attached wall bracket for

mounting the speaker to the ceiling!

CONNECTING

Caution! Turn your amplifier off before making

any connections.

• Your loudspeakers are equipped with positive (Red) and

negative (Black) connection terminals on the rear of the

cabinet. These correspond to the positive and negative

terminals on the appropriate channel (left, right, center, rear

etc.) of your amplifier.

Standard Connections (See Figure 5.)

• All speakers in your system must be connected in phase with

the positive speaker terminal connected to the positive amplifier

terminal. Repeat this for the negative speaker terminal and

amplifier terminals. Most speaker wire has distinguishing

markings on the insulation of one of the conductors to assist in

correct hookup.

• Use 16 gauge (AWG), two conductor, copper wire at a

minimum and larger gauge wire for longer runs. The connection

terminals on your loudspeaker will accommodate bare wire,

spade terminals or banana type plugs.

• Use either pair of positive and negative terminals keeping the

metal coupling straps in place.

Caution! With all connection types, take care that there is

no contact between the positive and negative terminals

at the speaker and amplifier. Damage to your equipment

may result!

Bi-wire Connections (See Figure 6.)

Some models are equipped with two pairs of connection

terminals for bi-wire hookup and enhanced performance.

• Remove the metal coupling straps.

Bass Management

When using your speakers in a home theater system, consult

the owner’s manual of your surround electronics for proper

application of bass management settings.

• As a general rule, compact speakers (Bookshelf, Center

Channel and Surrounds) are set to the “Small,” or bass-limited

setting.

• Floorstanding speakers are typically set to the “Large,” or

full-range setting.

• Also refer to the electronics instructions for adjusting the

relative volume levels of the speakers so they are at the same

level when in the listening position.

CARE AND CLEANING

• Occasional dusting or wiping of the cabinet with a damp cloth

is all that is required. Never use abrasive or solvent type

cleaners or harsh detergents.

• A vacuum cleaner with a soft brush attachment may be used to

clean the grille fabric.

• Never spray polishes or cleaners on the drive units (woofers,

midranges or tweeters).

WARRANTY

USA and Canada Only

The Warranty below is valid only for sales to consumers in the

United States and Canada. KLIPSCH, L.L.C. (“KLIPSCH”)

warranties this product to be free from defects in materials or

workmanship (subject to the terms set forth below) for a period

of five (5) years from the date of purchase. During the Warranty

period, Klipsch will repair or replace (at KLIPSCH’s option) this

product or any defective parts (excluding electronics and

amplifiers). For products that have electronics or amplifiers, the

Warranty period on those parts is for a period of two (2) years

from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH

authorized dealer from which you purchased this product. If your

dealer is not equipped to perform the repair of your KLIPSCH

product, it can be returned, freight paid, to KLIPSCH for repair.

Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will

need to ship this product in either its original packaging or pack-

aging affording an equal degree of protection.

Proof of purchase in the form of a bill of sale or receipted invoice,

which is evidence that this product is within the Warranty period,

must be presented or indicated to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number

has been altered or removed from this product or (b) this product

was not purchased from a KLIPSCH authorized dealer. You may

call 1-800-KLIPSCH to confirm that you have an unaltered serial

number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is valid only for the original purchaser and will

automatically terminate prior to expiration if this product is sold or

otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due

to misuse, abuse, negligence, acts of God, accident, commercial

use or modification of, or to any part of, the product. This

Warranty does not cover damage due to improper operation,

maintenance or installation, or attempted repair by anyone other

than KLIPSCH or a KLIPSCH dealer which is authorized to do

KLIPSCH warranty work. Any unauthorized repair will void this

Warranty. This Warranty does not cover product sold AS IS or

WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS

WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.

KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

Produktspecifikationer

Varumärke:	Klipsch
Kategori:	högtalare
Modell:	Reference RF-83
Vikt:	78400 g
Färg:	Nee
Processorfrekvens:	600 MHz
Strömförbrukning (i standby):	140 W
Nätförsörjning:	1300 W
Internminne:	256 MB
Strömförbrukning (PowerSave):	10 W
Typ av mat:	230 VAC +/- 10%, 50/60Hz
Förvaringstemperatur:	5 - 32 °C
Mac-kompatibilitet:	Ja
Nätverksfunktioner:	10/100BaseTX Ethernet
Flashminne:	768 MB
Maximal-upplösning:	1200 x 1200 DPI
Medietyper för papperslåda:	Enveloppen
Uppvärmningstid:	45 s
Utskriftsteknik:	Laser
Utskriftshastighet (svart, standardkvalitet, A4/US Letter):	50 ppm
Duplexutskrift:	Ja
Sidbeskrivningsspråk:	PostScript 3
Indikation på användning (max):	300000 pagina's per maand
Maximal ingångskapacitet:	3100 vel
Total uteffekt:	500 vel
Maximal pappersstorlek i ISO A-serien:	A3
ISO A-seriens mått (A0...A9):	A3, A4, A5, A6
Nätverksprotokoll som stöds (IPv4):	TCP/IP, EtherTalk. TCP/IP: ARP, IPv4, ICMP, UDP, TCP, LPR, HTTP, SMTP, BOOTP, DHCP, SNMPv1, SNMPv2, DNS, WINS, IPX/SPX
Ljudtrycksnivå (tryck):	54 dB
Maximala tryckmått:	297 x 420 mm
ISO B-seriens mått (B0...B9):	B5
Relativ luftfuktighet under lagring (ingen kondens):	5 - 85 procent
Icke-ISO tryckpappersmått:	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
Mått (B x D x H):	640 x 525 x 851 mm
Mediaviktfack 1:	60 - 215gsm
Relativ luftfuktighet i drift (VV):	15 - 85 procent
Maximal drifttemperatur:	5 - 32 °C