Kogan KAACCHWKITA Bruksanvisning

Kogan Dashcam KAACCHWKITA

Läs gratis den bruksanvisning för Kogan KAACCHWKITA (7 sidor) i kategorin Dashcam. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 8 recensioner. Har du en fråga om Kogan KAACCHWKITA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
Hardwire Kit for Dash Cameras
KAACCHWKITA
Installation
1. Open the fuse box. The location of the fuse box will differ depending on the car.
2. Locate the ACC+ and BAT+ fuse slots.
3. Connect the red wire to the ACC+ fuse slot. For 24-hour surveillance, connect the
yellow wire to the BAT+ fuse slot. To only record when the car is on, connect the
yellow wire to the ACC+ fuse slot.
4. Connect the black wire to a ground.
Note
It is highly recommended to have this hardwire kit installed by a licenced auto
electrician.
5. Connect the hardwire kit to the dash camera and ensure it powers on.
6. Route the camera cable through the vehicle’s ‘A’ pillar trim.
ACC Wiring Diagram
Output 5V
Acc+
Acc+
Ground
Red connects to the ACC fuse slot
Yellow connects to the ACC fuse slot
Black wire to vehicle ground
Ignition

Produktspecifikationer

Varumärke: Kogan
Kategori: Dashcam
Modell: KAACCHWKITA

Behöver du hjälp?

Om du behöver hjälp med Kogan KAACCHWKITA ställ en fråga nedan och andra användare kommer att svara dig