Kohler Fleur K-4606 Bruksanvisning
Sidor 20 toalett
Läs bruksanvisningen för Kohler Fleur K-4606 gratis online eller ladda ner PDF:en. 6 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
1007287-2-A
2001 Kohler Co.
FLEUR
LITE
VITREOUS CHINA
REVERSE TRAP TOILET
BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize yourself with
the required tools, materials, and installation sequences. Follow the
sections that pertain to your particular installation. This will help you
avoid costly mistakes.In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the latest product
information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and warranty
information – please leave instructions for the consumer.
ORDERING INFORMATION
Fleur
Lite
ToiletK-3447. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bowl K-4267(M)
Tank K-4606
When specified:
3/8” supplyK-7637. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor bolts (pair)21401. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES
The K-3447 has a 12” (30.5cm) roughing-in dimension.
Ensure that the new toilet has the correct roughing-in
dimension. See Fig. #1.
Seat post holes on 5-1/2” (14cm) centers.
Water depth from rim is 6-7/8” (17.5cm).
2” (5cm) passageway.
Be very careful while working with vitreous china
products. Vitreous china can break or chip if the bolts
and nuts are overtightened, or if carelessly handled.
Carefully inspect the new fixture for any sign of damage.
Observe all local plumbing and building codes.
Shut off the water supply.
For new construction, refer to the dimensions in Fig. #1
and Fig. #4 for locating the supply shut-off valve.
Fixture dimensions are nominal and conform to
tolerances established by ANSI Standards (A112.19.2).
Provide adequate trip lever clearance if shelving or other
structures are to be installed above the toilet tank. See
Fig. #1.
TOOLS AND MATERIALS REQUIRED
10” adjustable wrench
1/2” open end wrench
12” pipe wrench
Metal file (file cut)
Tape measure
Tubing cutter
Level
Hacksaw
Putty knife
Screwdriver
Toilet gasket (wax seal)
Toilet T-bolts (2), 5/16” diameter
Toilet setting compound (optional)
Toilet supply shut-off valve, 3/8” recommended
NOTICE:If the existing toilet does not have a supply shut-off
valve below the tank, install one before installing the new toilet.
Produktspecifikationer
| Varumärke: | Kohler |
| Kategori: | toalett |
| Modell: | Fleur K-4606 |
Behöver du hjälp?
Om du behöver hjälp med Kohler Fleur K-4606 ställ en fråga nedan och andra användare kommer att svara dig
toalett Kohler Manualer
Kohler Cavata K-45989 Bruksanvisning Kohler Cimarron K-3496-HE Bruksanvisning Kohler PureWash K-8298 Bruksanvisning Kohler Adair K-6925 Bruksanvisning Kohler Couture K-4605 Bruksanvisning Kohler PureWash K-28118 Bruksanvisning Kohler Cimarron K-3887-U Bruksanvisning Kohler Cimarron K-31640-DRY Bruksanvisning
Populära i toalett
toalett Manualer
Nyaste toalett Manualer
Brondell CleanSpa CSL-40 Bruksanvisning Brondell PureSpa PSW-75 Bruksanvisning Brondell SimpleSpa Thinline SS-150 Bruksanvisning Brondell Swash SE600 Bruksanvisning Brondell CleanSpa MBH-40 Bruksanvisning Brondell SouthSpa LH-20 Bruksanvisning Brondell PureSpa Essential PS-91 Bruksanvisning Brondell Swash LT99 Bruksanvisning Brondell PureSpa PS-65 Bruksanvisning Brondell CleanSpa Luxury MBH-40 Bruksanvisning