Konig KN-MICW620 Bruksanvisning

Konig mikrofon KN-MICW620

Läs gratis den bruksanvisning för Konig KN-MICW620 (68 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Konig KN-MICW620 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/68
56
SYSTÉM S BEZDRÁTOVÝM
MIKROFONEM
44
LANGATON
MIKROFONIJÄRJESTEL
32
SISTEMA DE MICRÓFONO
INALÁMBRICO
20
DRAADLOOS
MICROFOONSYSTEEM
8
DRAHTLOSES MIKROFONSYSTEM
62
SISTEM CU MICROFON WIRELESS
50
TRÅDLÖST MIKROFONSYSTEM
38
VEZETÉK NÉLKÜLI
MIKROFONRENDSZER
26
SISTEMA DI MICROFONO
WIRELESS
14
ENSEMBLE MICRO SANS FIL
WIRELESS MICROPHONE SYSTEM
KN-MICW620
2
ENGLISH
Introd ion:uct
Wir ss microphone stem with two microphones and a information display. True ele sy
diver ty for a opt al reception. The system is equipped with a special voice l iter si im im
com essor to avoid distortion caused by high nd peaks. pr sou
Description ceiver:re
1. POWER: On/off button
2. SELECT: switch between receiver A and B for the use of buttons 3, 4 or 5
3. SET: button for function set, tune or pre-programmed channels
4. UP: button for tuning up or channel selection up of pre-pro ammed channelsgr
5. DOWN: button for tuning down or channel selection down of pre-pro ammed channelsgr
6. DISPLAY: separate for receiver A and B
7. VOLUME CONTROL: separate for receiver A and B
8. ANTENNA: separate antenna for receiver A and B
9. ANTENNA CONNECTOR: for connection of antenna A and B
10. UNBALANCED AUDIO OUTPUT: 6,35mm output for mixed signal (A+B) or separate
signal of receiver A and B
11. BALANCED AUDIO OUTPUT: separate XLR separate XLR outputs for channel A & B
3
Description LCD display receiver:
RF: Shows the strength of the received microphone signal
AF: Shows the microphone‘s audio signal level
CH01: Selected pre-programmed channel
A ANT: The antenna which receives the signal of the microphone (A for receiver
A and B for receiver B)
864.40: Frequency of the selected pre-programmed channel
OPEN: Shows which receiver (display) is selected for the use of function
buttons 2~5
AUTO: Shows that the microphone is powered off. Appears also when there is no
connection with the microphone on the showed frequency in the display.
MUTE: There is no audio output from the receiver to mixer or amplifier because
the microphone is powered off or there is no reception
TUNE: Push the SELECT button (2) to switch between manual tuning or
pre-programmed channels. With manual tuning it's possible to select the
frequency by steps of 0,05MHz. The range is 840.00MHz till 868.00MHz.
This feature offers the use of other wireless microphones operating in
the frequency band from 840.00MHz till 868.00MHz. Note: the supplied
microphones are pre-programmed from 863.00MHz till 865.00MHz
IMPORTANT NOTICE:
It‘s the responsibility of the user to ensure that the use of frequencies comply
with the local regulations and does not cause interference with other users.

Produktspecifikationer

Varumärke: Konig
Kategori: mikrofon
Modell: KN-MICW620
Enhetsplacering: Aanrecht
Färg på produkten: Black, Stainless steel
Inbyggd display: Nee
Vikt: 5000 g
Bredd: 200 mm
Djup: 290 mm
Höjd: 320 mm
Vattennivåindikator: Ja
Husmaterial: Synthetische
Tillgångar: 1000 W
Vattentankens kapacitet: 0.8 l
Indikator ljus: Ja
Kaffebryggare typ: Half automatisch
Kaffeinmatningstyp: Gemalen koffie
Reservoar för bryggkaffe: Beker
Kapacitet i koppar: 8 kopjes
Inbyggd kvarn: Nee
Att göra espresso: Ja
Maximal arbetsbelastning: 0.8 bar
Antal sprutor: 2
Avtagbar spillplatta: Ja
Belyst på/av-knapp: Ja
Typ produkt: Espressomachine
Värmesystem: Boiler

Behöver du hjälp?

Om du behöver hjälp med Konig KN-MICW620 ställ en fråga nedan och andra användare kommer att svara dig