Konig SEC-ALARM200 Bruksanvisning

Konig Larmet ringer SEC-ALARM200

Läs nedan 📖 manual på svenska för Konig SEC-ALARM200 (72 sidor) i kategorin Larmet ringer. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/72

2013-10-22

SEC-ALARM200

MANUAL (p. 2)

WIRELESS ALARM SYSTEM

ANLEITUNG (S. 6)

DRAHTLOSES ALARMSYSTEM

MODE D’EMPLOI (p. 10)

SYSTEME D'ALARME SANS FIL

GEBRUIKSAANWIJZING (p. 14)

DRAADLOOS ALARMSYSTEEM

MANUALE (p. 18)

SISTEMA D'ALLARME SENZA FILI

MANUAL DE USO (p. 22)

SISTEMA DE ALARMA INALÁMBRICA

MANUAL (p. 27)

SISTEMA DE ALARME SEM FIOS

HASZNÁLATI ÚTMUTATÓ (o. 31.)

VEZETÉK NÉLKÜLI RIASZTÓRENDSZER

KÄYTTÖOHJE (s. 35)

LANGATON HÄLYTYSJÄRJESTELMÄ

BRUKSANVISNING (s. 39)

TRÅDLÖST ALARMSYSTEM

NÁVOD K POUŽITÍ (s. 43)

BEZDRÁTOVÝ POPLAŠNÝ SYSTÉM

MANUAL DE UTILIZARE (p. 47)

SISTEM DE ALARMĂ WIRELESS

ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 51)

ΑΣΥΡΜΑΤΟ ΣΥΣΤΗΜΑ ΣΥΝΑΓΕΡΜΟΥ

BRUGERVEJLEDNING (s. 55)

TRÅDLØST ALARMSYSTEM

VEILEDNING (s. 60)

TRÅDLØST ALARMSYSTEM

ИНСТРУКЦИЯ (стр. 64)

БЕСПРОВОДНАЯ СИСТЕМА

СИГНАЛИЗАЦИИ

KILAVUZ (s. 69)

KABLOSUZ ALARM Sİ İSTEM

ENGLISH

WIRELESS ALARM SYSTEM

QUICK SETUP GUIDE

Functions include:

Alert – Advises you to what is happening around the house.

Alarm – Protects your home / assets while you are away.

Communication – Calls you during an emergency, you can also call in to perform a variety of

operations.

This Quick Guide will show you how to setup the system and use basic functions. It is strongly

recommended that you refer to the User’s Instructions for full illustrations on how the system should be

installed and operated.

Installation of the Control Panel

1. Plug in the adapter to a wall socket

and the other end should be

connected to the socket on the

Control Panel marked “DC 12 V”. You

should hear 3 beeps.

2. Remove the screw on the battery

cover and insert 4 pcs of AAA

batteries into the battery holder.

Tighten the screw afterwards.

3. Plug in a phone line from the “LINE”

socket to the phone outlet on the

wall.

4. If you want to connect a telephone to

the Control Panel, the phone can be

plugged into the socket marked

“PHONE” on the Control Panel.

Installation of Sensors - Batteries

Insert batteries in all the

sensors and mount them

accordingly. Please refer to the

User’s Instructions for details

on how to install the Motion

Sensor and Door / Window

Sensor.

Remove the yellow

protective tag from

the sensors.

Insert 9V alkaline

battery in the sensor

Operation - Alert Mode

All the sensors are preprogrammed at the factory, so the

Control Panel can communicate with these sensors after the

batteries are installed properly.

Door/Window Sensor

Activate the Door / Window Sensor, you will hear continuous

beeping, one beep at a time, indicating zone 1 sensor is

activated. Activate the other Door / Window Sensor, you will

hear continuous beeping, two beeps at a time, indicating

zone 2 sensor is activated.

Notes: The door/Window Sensor is factory default in zone 1

and zone 2.

Activate the sensor

by opening the door,

you will hear voice

announcement and

continuous beeping.

Close the door, and

beeping stop.

Motion Sensor

To perform the walk test, its necessary to enable the Alert Zone (Bypass Zone) feature in the Control

Panel. After the walk test, it needs to disable this alert zone feature otherwise it will bypass the signal in

the alarm mode.

To enable the alert zone feature:

1. Press [PROG] + MPIN [factory default 1 2 3 4].

2. Press [8] to select Alert Zone.

3. Press [8] to enable for zone 3. The zone 3 LED will stay ON after selected.

4. Press [PROG] when finished.

Walk in front of the Motion Sensor, you will hear the continuous beeping from the Control Panel.

Beeping will continue for approx. 20 seconds for every motion detected.

To disable the alert zone feature:

1. Press [PROG] + MPIN [factory default 1 2 3 4].

2. Press [8] to select Alert Zone.

3. Press [3] to disable for zone 3. The zone 3 LED will flash after selected.

4. Press [PROG] when finished.

Notes:

1) The Motion Sensor is factory default in zone 3.

2) If the Motion Sensor doesn’t respond to your movement, try not to move in front of the sensor for

20 seconds (i.e. no motion is detected in 20 seconds), then walk again. The Motion Sensor is

designed to be triggered only if no motion is detected for 20 seconds.

Program Emergency Phone Number

During an emergency, the Control Panel can call up to 5 phone numbers to inform you about an

emergency situation. There are 5 phone memories, it will first call phone memory 1, then phone

memory 2, etc. It will call phone memory 5 last. Each phone number can have a redial count up to

Beep

Produktspecifikationer

Varumärke:	Konig
Kategori:	Larmet ringer
Modell:	SEC-ALARM200
Typ av operation:	Touch
Färg på produkten:	Roze
Inbyggd display:	Ja
Vikt:	7500 g
Bredd:	285 mm
Djup:	285 mm
Höjd:	470 mm
Barnlås:	Ja
Ljudnivå:	- dB
Förpackningens vikt:	10800 g
Förpackningens bredd:	390 mm
Djuppackning:	390 mm
Förpackningshöjd:	610 mm
Användarmanual:	Ja
Husmaterial:	Acrylonitrile butadiene styrene (ABS), Metal, Fabric
Ljudnivå (låg hastighet):	35 dB
Ljudnivå (hög hastighet:	55 dB
Avtagbart filter:	Ja
Antal hastigheter:	5
Lämplig för rum upp till:	70 m²
Placering:	Vloer
Ursprungsland:	Zwitserland
Strömförbrukning (max):	75 W
Fjärrstöd för smartphone:	Ja
Nattläge:	Ja
Luftreningshastighet:	300 m³/uur
Automatiskt läge:	Ja
Fungerar med Amazon Alexa:	Ja
Antal filtersteg:	2
Fjärrstyrd:	Ja
PM2.5-sensor:	Ja
Filterlivslängd (max):	12 maand(en)
Effektivitet:	99.95 procent
Antibakteriellt skydd:	Ja
Wifi:	Ja
AC-ingångsspänning:	220 V
Strömförbrukning (typiskt):	35 W
HEPA-klass:	HEPA 13
Luftrening (CADR) (rök):	299 m³/uur
PM10-sensor:	Ja
Applikationssupport:	Ja
Filteralternativ:	Allergens, Dust mites, Microbes, Pollen, Viruses, Cigarette smoke, Fine dust, Mold, Skin flakes
HEPA-filter:	Ja
Voorfilter:	Ja
Luftrening (CADR) (damm):	290 m³/uur
Luftrening (CADR) (pollen):	293 m³/uur
Filterbyte krävs:	Ja