Kramer AD-RING Bruksanvisning

Läs gratis den bruksanvisning för Kramer AD-RING (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 42 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 6 recensioner. Har du en fråga om Kramer AD-RING eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Technical Note

KRAMER ELECTRONICS, Ltd.

E- mail:info@kramerav.com

Web: www.kramerav.com

Product Name:

ADRING-

Current Version:

Ver.Type

Ver No.

Date

Firmware

–

–

Software

–

–

Web

–

–

Hardware

–

–

Technical Note Date:

March 4, 2020

1. -ADRING is a very popular product that can be ordered in different configurations. See

document KRAMER AD-RING CONFIGURATIONS in the attachment.

2. , - In most of the applicationsadapters included in ADRING workwithout any problem.

3. Unlike other product installations that use permanent sources and displays, a typical

AD-RING use case is in BYOD environments in which a wide variety of sources and

displays are used and you may encounter compatibility issues.

4. Any physical connection attenuates the signaland may affect the provided distances

and resolutions. Therefore, connecting an additional cable between the ADwhen -RING

and the display device, use only highquality -Kramer cables such as C- HM/HM/PRO.

5. / MDP 4K versions of DisplayPort ini isplayortadaptors have known limitations and

incompatibilities with certain computers, devices, and installations. If maximum

compatibility is a concern, we recommend using the standard 1080p - ADRINGS:

•--1 ADRING

•--2 ADRING

•--3 ADRING

•--8 ADRING

6. If an installation requires connecting additional products in the chain, an additional

active product may be required to boost / reclock the HDMI signal ( for example,

PTVM-3H2,-2HXL,

VS- 62H, and more).

7. If an acable or device is connected to the ADRING, this product may require an ctive -

external power source.

8. -Not all USBC devices use the same technologynot all C devices are . Therefore, USB-

compatible with a single adaptor.

9. If one of the adapters in the AD- RING set becomesunusable (through mechanical

damage, total failure with different sourcesetc.) there is no need to replace or discard ,

the entire set. Each component of the ADRING can be ord-ered and replaced

separately. Seetable below. the

10. To replace adapters in the AD-, RING setusa e the TL −RINGset that includes 1.5mm

Hex wrench and 10 size pin drivercan be used for locking an ADTorx T- that-RING set

on an HDMI cable.

Produktspecifikationer