KStrong UFA21004 Bruksanvisning
KStrong
ej kategoriserat
UFA21004
Läs gratis den bruksanvisning för KStrong UFA21004 (13 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om KStrong UFA21004 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/13
UFA20504, UFA20506, UFA20003, UFA20004, UFA20006, UFA20010,
UFA20016, UFA20024, UFA20030, UFA21004, UFA21006, UFA710103,
UFA710104, UFA710106, UFA710003, UFA710004 & UFA710006
THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS:
CROSS ARM STRAPS AND
ANCHOR WIRE ROPE SLINGS
USER INSTRUCTION MANUAL
This manufacturer's user instruction manual meets the requirements of ANSI Z359.18-2017. As per OSHA, this manual
should be used as a part of an employee training program.
TRAINING
In order to ensure that the user is familiar with the instructions provided in this manual, it becomes the responsibility of
the user to undergo proper training on the proper inspection, use and maintenance of this equipment. It is also the
employer's responsibility to ensure that all users are trained in proper use, inspection and maintenance of Fall
Protection Equipment.
TECHNICAL SPECIFICATION
The products enumerated in this instruction manual are a part of a personal protective, work support or rescue system.
It is important that the user reads and follows the manufacturer's instructions for each component of the system. This
manual contains information which is important to the user's safety and should be kept in a safe place for future
reference as needed. The instructions provided in this manual are meant for the use of this equipment and should be
read thoroughly and understood by the user before the equipment is used. Manufacturer's instructions must be
properly followed for the correct use and maintenance of this equipment. Please contact KStrong for any queries or
questions regarding use of this equipment.
WARNING
01
KStrong Anchor
Model
UFA20504
UFA20506
UFA20003
UFA20004
UFA20006
UFA20010
UFA20016
UFA20024
UFA20030
UFA21004
UFA21006
UFA710103
UFA710104
UFA710106
UFA710003
UFA710004
UFA710006
S.No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Material of
Construction
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
Polyester and Steel
5/16" Galvanized
PVC Coated Wire Rope
5/16" Galvanized
PVC Coated Wire Rope
5/16" Galvanized
PVC Coated Wire Rope
5/16" Galvanized
PVC Coated Wire Rope
5/16" Galvanized
PVC Coated Wire Rope
5/16" Galvanized
PVC Coated Wire Rope
Minimum Breaking
strength
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5000 lbs.
5620 lbs.
5620 lbs.
5620 lbs.
5620 lbs.
5620 lbs.
5620 lbs.
Conformity
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
ANSI Z359.18-2017
02
IMPORTANT INFORMATION
Ÿ It is important to inspect the equipment in accordance with the manufacturer's instructions before each use.
Ÿ Inspection of equipment should be conducted on a regular basis by a qualified person with the results recorded in
the inspection log.
Ÿ DO NOT REMOVE product labels which include important warnings and information for the authorized person.
"Authorized Person" is a person who is exposed to fall hazards during the course of their work. This individual
requires formal training in the use of personal fall protection equipment and systems. The term "Authorized
Person" may be used interchangeably with "User" and "End-User."
Ÿ DO NOT ALTER the equipment in any way.
Ÿ Always send the equipment back to the manufacturer, or to the persons or entities authorized in writing by the
manufacturer, for any repairs if required.
Ÿ If a fall were to occur, then the forces of impact could affect the user. Hence it is important to consider the age,
fitness level and the health condition of the user before the equipment is put to use. Consult a physician in case
the user is not feeling physically fit and has doubts about his ability to safely absorb the fall arrest forces. This
equipment is not meant for use by pregnant women and minors.
WARNING !!
Ÿ Never use any natural material like manila, cotton, etc. as part of a Fall Protection System.
COMPATIBILITY OF CONNECTORS
Ÿ Always have a Rescue Plan ready and at hand when using this equipment.
Ÿ Immediately remove from service any equipment that has been subjected to a fall.
Ÿ Authorized persons, or users, shall be trained on all warnings and instructions provided in this manual.
Ÿ Such harmful environments require a more frequent inspection and servicing program of the fall protection
equipment to maintain the integrity and safety of the equipment. Contact KStrong if in doubt.
Ÿ A competent person must ensure compatibility of the system to minimize any potential for accidental disengagement.
Ÿ Fall protection equipment should only be used for the purpose for which it has been designed.
Ÿ Take proper precautions to remove any debris, material, obstructions, etc. from the work area which could cause
injury, or otherwise interfere with the functioning of the system.
Ÿ Always check for obstructions below the work area to make sure that the potential fall path is clear.
COMPONENT COMPATIBILITY
Ÿ It is important to keep in mind environmental hazards when selecting fall protection equipment.
Ÿ Immediately discard any product which is exhibiting unusual wear, deformity or deterioration.
Ÿ Do not expose the equipment to chemicals, highly corrosive or caustic environments, or to direct sunlight and UV
radiation which may cause UV degradation.
Ÿ Keep the equipment away from anything that could damage it such as sharp edges, rough or abrasive surfaces,
high temperature surfaces, heat and welding sources, moving machinery, electrical hazards, etc.
Ÿ This equipment should never be used for towing and hoisting or for any other purpose than its intended use.
Ÿ All the synthetic material of fall protection equipment must be protected from slag, hot sparks, open flames or
other heat sources.
Component compatibility with KStrong manufactured fall protection equipment is ensured by strictly following the
instructions for each type of equipment used. However, if the fall protection equipment utilizes combinations of
components or sub systems that are manufactured by others, only a “qualified” or “competent” person (as defined in
OSHA) can ensure the compatibility. If substitutions or replacements are made with non-approved components or sub
systems, then this may severely affect the compatibility of the equipment, making the complete system unsafe for use.
To ensure the compatibility of the connectors with their connecting element, it is important to safeguard that the sizes
Ÿ It is important for all authorized persons and users to refer to the applicable ANSI standards and to the regulations
governing occupational safety.
Ÿ It is recommended that heat resistant materials are used in such applications. It is important to allow adequate fall
clearance below the work surface.
Produktspecifikationer
| Varumärke: | KStrong |
| Kategori: | ej kategoriserat |
| Modell: | UFA21004 |
Behöver du hjälp?
Om du behöver hjälp med KStrong UFA21004 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat KStrong Manualer
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
ej kategoriserat Manualer
- Sensei
- Gentrax
- Ausclimate
- NUX
- MRP
- Doepke
- INIU
- Melchioni
- Plextor
- Ferplast
- Neumann
- Listen
- Stratco
- Silver Cross
- WAGAN
Nyaste ej kategoriserat Manualer
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025