Kuzco Airen WS92617 Bruksanvisning

Läs gratis den bruksanvisning för Kuzco Airen WS92617 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 9 recensioner. Har du en fråga om Kuzco Airen WS92617 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

INSTALLATION SHEET

WS92617

LED Wall Sconce

START FROM HERE

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120V input

20230109

1. Remove fixture from its original package

2. Separate mounting plate from canopy by (1c)(2a)

removing canopy screws (2b)

3.

Attach mounting plate to electrical junction box (1c)(1a)

using junction box screws provided in hardware (1e)

package

4. Make proper electrical connections ( to “L”, blackhot

white to “N”, to with wire nuts neutralground“GND”)

(1b) provided in hardware package and place driver (4a)

in canopy (2a)

5. Attach canopy to mounting plate with canopy (2a)(1c)

screws (2b)

1a.1b.1c.1e.4a.2a.2b.

Produktspecifikationer