La Crosse Technology 30024 Bruksanvisning
Läs gratis den bruksanvisning för La Crosse Technology 30024 (2 sidor) i kategorin Klockradio. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 6.5 recensioner. Har du en fråga om La Crosse Technology 30024 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Page 3 Page 4Page | 2
.9-inch LED Alarm Clock
with USB Charging Port
Model: 30024 & 30025
DC: 011419
POWER UP
1. Insert the 120 volt power cord into an outlet, then into your
clock. Optional: Insert one 9 volt battery for backup.
2. 12:00 will flash as an indication to set the time and/or alarm.
TIME SETTING
1. Continuously hold down the TIME button, then:
• Press the HOUR button to set your hour.
• Press the MINUTE button to set your minutes.
Note: The PM indicator will appear when you advance to PM time.
2. Release the TIME button when the correct time is shown on the
display.
USB CHARGING PORT
• Connect your external device’s USB charging cable
(not included) to the USB charging port.
• USB Power Output: 5V 1A maximum current.
• Charge devices that are self-regulating.
TIME ALARM
ON: Slide the ALARM ON/OFF switch to the ON position to turn
the alarm ON. The alarm light indicator will appear.
OFF: Slide the ALARM ON/OFF switch to the OFF position to turn
the alarm OFF. The alarm light indicator will disappear.
ALARM ON/O FF
1. Continuously hold down the ALARM button, then:
• Press the HOUR button to set your hour.
• Press the MINUTE button to set your minutes.
Note: The PM indicator will appear when you advance to PM time.
2. Release the ALARM button when the correct alarm time is set.
SNOO Z E
• When the alarm sounds press the SNOOZE/LIGHT button to
silence the alarm for 10 minutes.
• Snooze may be repeated.
Note: This is a Ascending alarm. It will sound with increased
frequency for 2 minutes then shut o if no buttons are pressed.
• Always purchase the correct size and grade of battery most
suitable for ntended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.
CARE & MAINTENANCE
BATTERY BACKUP
• Insert one “9V” battery into the battery compartment on the back
of the clock. The battery will keep the alarm and time settings
until the power is restored.
• The LED display will not light-up but the alarm will sound at the
preset alarm time.
• If there is no battery installed but the power is interrupted, the
display will flash at 12:00 and the time and alarm need to be set
again.
Power: 120V power cord
Requires one 9V battery for back-up not included
Dimensions: 5.00 ”W x 2.00”D x 2.85”H
POWER REQUI REMENTS
BACKLI GHT
Your backlight has three levels: High, Low , and Off.
• Press the SNOOZE/LIGHT button to adjust.
Produktspecifikationer
| Varumärke: | La Crosse Technology |
| Kategori: | Klockradio |
| Modell: | 30024 |
Behöver du hjälp?
Om du behöver hjälp med La Crosse Technology 30024 ställ en fråga nedan och andra användare kommer att svara dig
Klockradio La Crosse Technology Manualer
11 Oktober 2025
18 Augusti 2025
31 December 2025
31 December 2025
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
17 Oktober 2024
Klockradio Manualer
- GoGEN
- Harman Kardon
- Cresta
- Mitsai
- JBL
- Audiosonic
- Vimar
- Acctim
- Prologue
- GPX
- Bearware
- Nedis
- Amplicomms
- Blaupunkt
- Trevi
Nyaste Klockradio Manualer
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025
10 Oktober 2025
10 Oktober 2025
6 Oktober 2025
6 Oktober 2025
29 September 2025
28 September 2025
27 September 2025