La Crosse Technology 617-249V2 Bruksanvisning
La Crosse Technology
Klockradio
617-249V2
Läs gratis den bruksanvisning för La Crosse Technology 617-249V2 (2 sidor) i kategorin Klockradio. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om La Crosse Technology 617-249V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
WWVB ATOMIC TI ME SI GNA L
Page | 2 Page | 3 Page | 4
1.8” LED Atomic Clock
with Dual Alarms and USB Charging
Model: 617-249v2
DC:062220
PO W ER UP
1. Insert the provided stand into bottom of clock.
2. Insert the 5.0 volt power cord into an outlet, then into your
clock. Remove the insulation tab from the CR2032 battery.
1. Press then release the SET button to enter the Settings Menu.
2. Press and release the + or - buttons to adjust the values.
Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next
item.
Settings Menu Order:
• Time Zone
• DST ON/OFF
• Hour
• Minutes
• Snooze Duration
SE TTINGS
FIND FAQS, AND MORE UNDER THE TAB HERE:SUPPORT
bit.ly/617-249
1 X CR2032
LITHIUM BATTERY
(INCLUDED)
5.0 V adapter
(included)
IMPORTANT: When powered on, the clock will immediately search for
the WWVB Atomic Time SIgnal for 7 minutes.
• Hold the ATOMIC button for 3 seconds to stop or start the search.
• During the atomic time search the buttons will not function.
• Backlight will dim.
• USB charge port will not work.
Signal Search Indicator:
• Receiving strong WWVB signal: LED flashing
• Successful Reception: LED solid
• Failed Reception: LED disappears
The clock will automatically search for the WWVB signal every night
at 1:00 am, 2:00 am and 3:00 am. If there is still no WWVB reception,
the clock will search WWVB time signal again at 4:00 am and 5:00 am
alternatively.
For best WWVB Atomic Time Signal Reception: Please keep your clock
three feet away from electrical outlets and other electronics, to avoid
interference.
AL A RM 1 & 2
In one setting for Alarm 1 & 2 you are able to::
• Set Alarm Time
• Activate/Deactivate Alarm
• Select Volume (HI/LO)
Note: A1 A2 The Blue LED Light next to the or indicates alarm is active.
Set Alarm 1 & 2:
1. Press then release the ALM 1 • 2 button to enter the Alarm Settings.
2. Press and release the + or - buttons to adjust the values. Hold to
adjust quickly.
3. Press and release the ALM 1 • 2 button to confirm and move to the
next item.
Alarm Settings Order:
• Alarm 1 Hour
• Alarm 1 Minutes
• Alarm 1 OFF/ON
• Alarm 1 HI/LO (volume)
• Alarm 2 Hour
• Alarm 2 Minutes
• Alarm 2 OFF/ON
• Alarm 2 HI/LO (volume)
Stop Alarm for 1 Day:
When alarm sounds. press the ALM 1 • 2 button once to stop the alarm
and reset to come on in 24 hours.
Snooze:
When alarm is sounding, press once, the alarm will be silenced
and come on again after the snooze duration selected.
Tip: if your second alarm activates while the first alarm is sounding or it is
in the snooze mode, the second alarm overrides the first alarm (the first
alarm is reset to come on the next day).
Produktspecifikationer
| Varumärke: | La Crosse Technology |
| Kategori: | Klockradio |
| Modell: | 617-249V2 |
Behöver du hjälp?
Om du behöver hjälp med La Crosse Technology 617-249V2 ställ en fråga nedan och andra användare kommer att svara dig
Klockradio La Crosse Technology Manualer
11 Oktober 2025
18 Augusti 2025
31 December 2025
31 December 2025
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
17 Oktober 2024
Klockradio Manualer
- AXIL
- Perel
- Aldi
- Konig Electronic
- Xavax
- QFX
- Fysic
- Gewiss
- Naxa
- GoGEN
- Majority
- Enhance
- Thomson
- Magnasonic
- MT Logic
Nyaste Klockradio Manualer
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025
10 Oktober 2025
10 Oktober 2025
6 Oktober 2025
6 Oktober 2025
29 September 2025
28 September 2025
27 September 2025