La Crosse Technology LTV-WSDTH04SO Bruksanvisning

La Crosse Technology Inte kategoriserad LTV-WSDTH04SO

Läs gratis den bruksanvisning för La Crosse Technology LTV-WSDTH04SO (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3.5 recensioner. Har du en fråga om La Crosse Technology LTV-WSDTH04SO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

B R E E Z E P R O S E N S O R

Model: LTV-WSDTH04So

DC: 012121

R E P L AC E M E N T S E N S O R - S TAT I O N C O N N E C T I O N

ADD TO THE LA CROSSE VIEW APP

1. Open your La Crosse View app, select the Devices tab from the main menu, and

then press the ADD DEVICE or PLUS (+) button near the bottom of the page.

2. Scan or type in the La Crosse View Device ID located on the bottom

of the sensor.

3. Give the device a Name and Location, and then press Save. Provided you have

the station connected to the Internet, you should begin to see your sensor data in

the app within the next few minutes.

For help with adding and removing devices within the La Crosse View app, please

view our video here: bit.ly/add_devices

La Crosse View Device ID

Page | 2

For users setting this up as a replacement sensor, follow these steps to get it synced

with your display:

1. Press and release the SENSOR button on your station until you see the WIND

section light up. Hold the MINUS (-) button to delete the original sensor. The

Reception Icon will begin to animate, indicating it is searching for a new sensor

connection.

2. Install 3 new AA alkaline batteries into the Breeze Pro sensor (as shown below).

3. Keep the sensor near the display and allow 5 minutes for the sensor readings to

appear.

MOUNTING

The illustrations above are not to scale and are for informative purposes only.

For additional sensor information, visit: www.lacrossetechnology.com/support

Page | 3

Mast

The horizontal conduit where the sensor

attaches. This Piece will connect to either

the Adjustable Base or Pole Adapter.

Pole Adapter

Used in place of the Adjustable Base

for mounting on top of cylindrical

conduits.

Alignment Arrows

Provide exact 90 or 180 degree

angles when aligned with the arrow

on the Mast.

1-Inch Maximum Pole Diameter

Hand Screw

Used to lock down and secure the Mast

to the Adjustable Base or Pole Adapter.

Included Mounting Accessories

For Accurate Measurements

-Ensure the sensor is mounted level with the Solar Panel facing the sun. This will optimize battery life and

transmit correct wind direction readings. This sensor is designed for use in the Southerm Hemisphere.

-Ideally, the Breeze Pro Sensor should be mounted on the tallest object in your area. Avoid positioning

the sensor in line, or below eaves, rooﬂines, trees, or other objects that may obstruct wind readings.

-Make sure all screws on the Mounting Bracket, Wind Cups, Wind Vane and Battery Compartment are

securely fastened.

- The sensor should be mounted with the wind cups on top.

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	Inte kategoriserad
Modell:	LTV-WSDTH04SO
Färg på produkten:	Black, Stainless steel, White
Vikt:	7 g
Sladdlängd:	1.3 m
Blåtand:	Nee
Anslutningsteknik:	Bedraad
Medföljande kablar:	Audio (3,5 mm)
Volymkontroll:	Knoppen
Förvaringsväska:	Ja
siffra:	1
Bärmetod:	In-ear
Typ av headset:	Stereofonisch
Impedans:	16 Ohm
Placera högtalare hörlurar:	Intraauraal
Intra-aural typ hörlurar:	Oordopjes
Hörlurars frekvensområde:	8 - 48000 Hz
3,5 mm-kontakt:	Ja
Hörlurskänslighet:	110 dB
USB-anslutning:	Nee
Antal knappar:	3
2,5 mm-kontakt:	Nee
Maximal-ineffekt:	100 mW
Kabelfärg:	Wit
Extra öronproppar:	Ja
Löstagbar kabel:	Ja
Akustiskt system:	Gesloten
Drivrutinstyp:	Dynamisch
Typ av styrenhet:	Lijnbesturingseenheid
Total harmonisk distorsion (THD):	0.2 procent
Typ produkt:	Headset
Antal-produkter-ingår:	1 stuk(s)
RF-anslutning:	Nee