La Crosse Technology WT-2150B Bruksanvisning
La Crosse Technology
Inte kategoriserad
WT-2150B
Läs gratis den bruksanvisning för La Crosse Technology WT-2150B (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 11.5 recensioner. Har du en fråga om La Crosse Technology WT-2150B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
Radio Controlled Alarm Clock
Introduction:
Congratulations on purchasing this Radio Controlled Alarm Clock. Welcome to
the world of radio controlled time-keeping technology. We hope you will enjoy
the convenience of never having to set your clock again and having the
confidence of knowing exactly what time it is. This innovative clock is ideal for
home or office use and is loaded with many features. Please read this
instruction manual to enjoy the full benefits of all the features.
Features:
• WWVB radio controlled time and date
• 12 or 24 hour time display
• Indoor temperature reading (°F/°C user selectable)
• Two independent alarm times
• Snooze interval setting from 0 (off) to 59 minutes
• Calendar display (weekday/month/date or month/date/year)
• Time zone map for continental United States
• Time zone selectable –1 hour to –12 hour or Greenwich Mean Time (GMT)
• LCD back light
• Manual time setting option
• Daylight savings time ON/OFF option
• Low battery indicator
Starting up the Alarm Clock 1. Slide the battery cover off as indicated by the triangle to open the battery
compartment.
2. Insert 1 x AA battery, observing polarity.
The alarm clock uses 1 x AA LR6 battery (Alkaline recommended)
3. Replace battery cover.
4. Upon power-up, the alarm will sound once and all LCD segments will light
up briefly.
Snooze button
Function Keys Battery Cover
Battery Compartment
5. The clock will now start searching for the WWVB time signal and the radio
tower icon will flash to indicate signal reception attempt. Do not press any
buttons at this time.
6. Reception typically takes 6-10 minutes during ideal reception time
(nighttime hours) and will timeout after 10 minutes if no signal is found.
7. Upon successful reception, the time and date will be set to absolutely
accurate time (default to Eastern time zone).
8. In the case of no reception keep in mind that for most locations reception
during daylight hours is not possible. In this case, you may manually set the
time or simply wait overnight.
Programming Mode
1) Press the SET key to enter programming mode.
2) Time Zone: Press the MODE/+ key to change the time zone.
a) Default upon starting is Eastern (-5 GMT)
b) Can be set to –1 to –12 hour and GMT
c) The US map will highlight the time zones set within continental
United
d) States (Eastern (-5), Central (-6), Mountain (-7), Pacific (-8)) or
“GMT” will be displayed if set to GMT (0).
e) Press the SET key
3) DST: Press the MODE/+ key to switch Daylight Savings Time off or on. The
WWVB automatically corrects for DST; “DST” is to be set to “OFF” only in
areas that do not follow DST. Press the SET key.
4) Snooze: Press the MODE/+ key to select the desired snooze length from 0
to 59 minutes. Default is 10 minutes; 0 is no snooze (pressing the
SNOOZE bar turns off the alarm). Press the SET key.
5) Manual time setting: This is not necessary unless the alarm clock did not
pick up a signal upon start up and it is not favorable to wait overnight for
time set. If the time is manually set, be sure to set the time to the correct
AM/PM time.
a) Press the MODE/+ key to set the hour. Press the SET key.
b) Press the MODE/+ key to set the minute. Press the SET key.
c) Press the MODE/+ key to set the year. Press the SET key.
d) Press the MODE/+ key to set the month. Press the SET key.
e) Press the MODE/+ key to set the day. Press the SET key.
f) Press the MODE/+ key to set the weekday. Press the SET key.
g) Press the MODE/+ key to set 12- or 24-hour mode. Press the SET key.
6) Temperature Selection: Press the MODE/+ key to select °F (Fahrenheit)
or °C (Celsius). Press the SET key. The programming mode is complete.
Alarm Setting Mode
1) Press the ALM1 or ALM2 key for two seconds to enter the Alarm 1 or Alarm
2 setting mode.
Produktspecifikationer
| Varumärke: | La Crosse Technology |
| Kategori: | Inte kategoriserad |
| Modell: | WT-2150B |
Behöver du hjälp?
Om du behöver hjälp med La Crosse Technology WT-2150B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad La Crosse Technology Manualer
12 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
23 September 2024
23 September 2024
18 September 2024
17 September 2024
14 September 2024
10 September 2024
Inte kategoriserad Manualer
- KRK
- EXO
- Lionelo
- MOOOV
- Plustek
- Datacolor
- Ovente
- Valore
- BirdDog
- Manhattan
- Warmup
- Metz
- Neets
- Genie
- Wamsler
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025