LabNation SmartScope A11 Bruksanvisning

LabNation Mätutrustning SmartScope A11

Läs gratis den bruksanvisning för LabNation SmartScope A11 (4 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9.5 recensioner. Har du en fråga om LabNation SmartScope A11 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

SmartScope A11/A12

User’s Manual

For laboratory use only

www.lab-nation.com

Operation instructions

For all instructions regarding installation, usage and operation of the SmartScope, please visit

http://www.lab-nation.com/smartscope/manual

Safety Instructions

Review the following safety precautions carefully before operating the device to avoid any personal injuries

or damages to the device and any products connected to it. To avoid potential hazards use the device as

specied by this user’s guide only.

Use proper accessories. Use only the cables and accessories that are certied and supplied by

LabNation.

Connect and Disconnect Properly. Do not connect or disconnect probes or test leads while they

are connected to a voltage source.

Connect and Disconnect Properly. Connect the probe output to the measurement device before

connecting the probe to the circuit under test. Disconnect the probe input and the probe reference

lead from the circuit under test before disconnecting the probe from the measurement device.

Use Proper Probes. To avoid shock hazard, use a properly rated probe for your measurement.

Avoid Circuit or Wire Exposure. Do not touch exposed connections or components when power is

on. Do not touch any parts of the SmartScope, or any objects connected to the SmartScope,

whenever any ground clip of the probes are connected to anything else than ground/earth.

Do Not Operate With Suspected Failures. If suspected damage occurs with the device, have it

inspected by qualied service personnel before further operations.

Do not operate in Wet/Damp Conditions.

Do not operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Do not connect any part of the SmartScope to voltages higher than 20V, or lower than -20V.

- Connect ground clip to earth only, never to elevated voltages!

For laboratory use only

www.lab-nation.com

Regulations

All LabNation products that are subject to the WEEE directive shipped from

13th August 2005 are compliant with the WEEE marking requirement. Such products are

marked with the “crossed-out wheelie bin” WEEE symbol (shown, right) in accordance with

European Standard EN50419.

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, LabNation BVBA, of Tolstraat 50, 2000 Antwerp, Belgium declare under our sole responsibility that the

product:

SmartScope (Models A11, A12)

to which this declaration relates:

Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

For Customers in Canada

This apparatus complies with Canadian ICES-003//NMB-003B.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

Produktspecifikationer

Varumärke:	LabNation
Kategori:	Mätutrustning
Modell:	SmartScope A11
Färg på produkten:	Zwart
Vikt:	213 g
Bredd:	70 mm
Djup:	15.7 mm
Höjd:	139 mm
LED-indikatorer:	Ja
Batterikapacitet:	10000 mAh
Laddningskälla:	USB
Laddare kompatibilitet:	Universeel
Antal samtidigt anslutna enheter (max):	3
Ingångsgränssnitt:	USB Type-C
Batteriteknik:	Lithium-Ion (Li-Ion)
Inbyggd radio:	Nee