Lanberg ICS-0808-0020 Bruksanvisning

Lanberg övervakningskamera ICS-0808-0020

Läs gratis den bruksanvisning för Lanberg ICS-0808-0020 (3 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 18 recensioner. Har du en fråga om Lanberg ICS-0808-0020 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

QUICK INSTALLATION GUIDE

WIRELESS KIT

Statement

Installation Instruction Of WIFI NVR KIT Record video Video Backup

Video Playback

Setup The System

Safety Caution

Out Of Box Audit

NVR

HDD Install

IPC

Thank you for purchasing our product! This quick user guide will talk about main usages of

the product. More information can be found on our website and the help www.lanberg.eu

center. This user guide may contain inaccurate content due to hardware and software

upgrade. It is subject to change without previous notice.

Note:

Wireless NVR can’t be connected to WIFI router wirelessly at present. They can be only

connected by network cable.

This system is standalone with embedded Linux Operating System in the NVR. Just like a

desktop PC, need to hook a screen to the NVR to enter the OS. Any TV , monitor with VGA

or HDMI input should work for it.

1 Install antennas for cameras and the NVR;.

2.Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable

not included);

3. Plug the NVR to power(use bigger 12V 2A power adapter);

4. Plug cameras to power(use smaller 12V 1A power adapters);

5. Within seconds, you should see camera’s images on the screen;

6.Plug the mouse(included) to an USB port on back of NVR. You shall then be able to operate

on the system.

In the OS you can ﬁnd fullest functionalities including live view, record, playback, video

backup and all settings.

Default ID: admin

Password: none (means leaving the password empty, just click login)

Tips：To protect your privacy, please set your password at earliest convenience. Right click

the mouse Go to System Setup System Admin User Management to set password.→ → →

Record video is very easy on camera system.

1.Time Recording: Setup period of time of recording on NVR GUI .Right click mouse→

System Setup Record setup Record Plan.Click “time”and put mouse icon on the upper → →

left corner(for example“1”as picture shows),press and drag the mouse to the right to choose

the time.The list will turn to red.

2.Motion Recording: Only detect motion and then start recording.Right click mouse→

System Setup Record setup Record Plan.Click“motion”and put mouse icon on the upper → →

left corner(for example“1”as picture shows),press and drag the mouse to the right to choose

the time. The list will turn to green.

3. → Alarm recording: Right click mouse System Setup→Record setup→Record Plan.Click

“Alarm”and put mouse icon on the upper left corner(for example “1”as picture shows),press

and drag the mouse to the right to choose the time. The list will turn to yellow.

Note: Users can setup any period of time they want,for example 0:00:00 - 23:59:59,That’s

24 hours *7 days recording.When NVR detects hard disk,the default setting will be 24

hours*7 days recording.

Use U disk to copy video,so easy and convenient!

1.2 USB ports: Plug U ﬂash disk into

the USB port of NVR. Right click

on main menu Video backup→ →

choose backup channel→choose

video mode setup searching →

time search→ →choose recording

ﬁle on the list→video backup

(support 32G U ﬂash disk at max.

Recording ﬁle is packed one hour

per time.)

Steps:right clik mouse in main menu Video playback choose date,channel,record mode→ →

→ →click search then can view playback ﬁle.

1. IIIustration for playback button: play, pause: fast forward*2,*4,*8；

2. Play ﬁle: Choose the recording ﬁle in ﬁle list,as number“1”shown in picture. Choose one

of the recording, click “play”to play to recording ﬁle;

3. Video backup: Choose the recording ﬁle in ﬁle list,as number“1”shown in picture.insert

the U ﬂash disk, click “video backup”to backup the ﬁle;

4. Timeline: Click “date”and “time”at left bottom to check the timeline of recording, as

number“2”shown in picture;

5. On the timeline with recording ﬁle,left click the mouse, the can playback the ﬁle.

Tips: the system may not include hard disk depending on the kit you selected. the NVR works

most 3.5" SATA HDD or 2.5"SATA HDD

1.Unplug your NVR from power,unscrew and remove the top cover.

2.Connect the SATA power and data cables from the NVR to the

corresponding ports on your HDD (as shown).

lding the hard drive and the DVR ,gently turn it over and line up

e holes on the hard drive with the holes on the NVR. using a

illips screwdriver,screw the provided screws into the holes and

semble the cover.

ote: New HDD have to be formatted before recording.

o get better WIFI signal, it had better place the NVR in open

ea and high position.

1. Please do not put any ﬂuid container on the product.

2. Please use the product in ventilated environment and prevent blocking the vents.

3. Please use included power supply with the product to prevent damage to the product.

4. Please use the product under its standard working temperature and humidity.(advised

in this manual or distributor’s website)

5. Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely

to make the product work properly.

6. Please obey the regulation and policy in your country and area during the installation

of this.

After receiving the product, please check all products and accessories with information

below. If any is missed or damaged, please contact the distributor.

1 Double antennas to WIFI range.WIFI Antenna Ports:

2. WAN Port: Connect your NVR to Internet

3 VGA Port:. For viewing on VGA monitor

4 HDMI Port: . For viewing on HDTV

5 USB Ports: . For mouse and backup

6 Power Input.

1. WiFi connection with NVRWIFI antenna: ；

2 input power 12V 1A;. DC Port:

3. Reset button: press reset button for 10 seconds to restore factory setting

and enter into matching-code mode.

ITEM:

WIFI NVR

Screw bag(4 screws for HDD)

DC 12V 2A power supply (for NVR)

User manual

WIFI IP Camera*

DC 12V 1A power supply(for IPC)*

Screw bag (for IPC）*

Antenna Extension Cord*

QUANTITY:

1pcs

4/8pcs

1/2(4CH/8CH)pcs

View On PC Via IE (Internet Explorer)

1. When your PC is in same LAN with the NVR （normally means they are connected to the

same router）

Step1.Find the IP address and port# of your NVR(IP address can be found in System

Setup Network Setup).→

2.OPTIONAL -When your computer/laptop is out of home/local network (eg. You want to

have a preview from the ofﬁce). Access from the CLOUD ID to the device

Step 1. Open your browser and enter the website address in the search engine:

www.noip.com - the website owner provides free DDNS services.

Step 2. Required account creation.

Enter: Hostname - the name you chose (eg Michał123) Choose a domain from the

drop-down list (eg DDNS.net Click on "Sign UP" to create an account.) After completing

the data, please conﬁrm your email to activate your account. step by step just like a service

provider leads you.

Step 3. NVR settings - Please enter

System Options→Network →DDNS

Director choose "NO-IP"→URL

enter the hostname (eg Michał123)

and the selected member from the

drop-down list (eg ddns.net)→User

enter the email given during

registration→Password enter the

password provided during

registration. Click the TEST button.

If the data is entered correctly, the

tests will pass

Step 4. In the browser, enter, for

example, michal123.ddns.net and

then we will open a page identical to

the one in the local network. You

must log in with administrator data

from the NVR (login and password).

Step 2. Enter the NVR’s IP address

in your IE browser for example:

http://192.1.1.7(If the default WEB

port 80 has been changed e.g. to

100,you’ll need to add new port

number when input IP address in

the browser, for example:

http://192.168.1.7:100).

NOTE: For proper conﬁguration, you

should have public IP and port

forwarding (available manual also at

www.noip.com right after

registration). View On Mobile

* quantities given in order for a 4-channel, followed by an 8-channel set (4ch/8ch).

Produktspecifikationer

Varumärke:	Lanberg
Kategori:	övervakningskamera
Modell:	ICS-0808-0020
Färg på produkten:	Zwart
Snäll:	AV-zender & ontvanger
LED-indikatorer:	Ja
Videolägen som stöds:	1080p
Maximal upplösning:	- Pixels
Anslutning för nätadapter:	Ja
Videoingång:	1
HDMI in:	1
RJ-45 utgångsportar:	1
Video av:	1
Antal HDMI-utgångar:	1
RJ-45 ingångsportar:	1
Maximal-räckvidd:	120 m