Lancom 1790-4G+ Bruksanvisning
Sidor 2 Engelska Router
Läs bruksanvisningen för Lancom 1790-4G+ gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 22 gånger. Fråga om modellen? Ställ en fråga
Hardware
Interfaces
WAN protocols
Package content
➀LTE / 4G antennas
Connect the two supplied cellular antennas to the
connectors Ant 1 and Ant 2.
➁WAN interface
Connect the WAN interface to your WAN modem
using the enclosed ethernet cable with the dark green
connectors.
➂Ethernet interfaces
Use the cable with the green-colored connectors to
connect one of the interfaces ETH 1 to ETH 3 to your PC
or a LAN switch.
➃SIM card slot (bottom side of the device)
Release the SIM-card holder and lever it upwards. Slide
the SIM card into the guide slot of the SIM-card holder.
Press the holder down until it clicks into place.
➄Configuration interface
Configuring the device via the serial interface
requires a serial configuration cable (available as an
accessory).
➅USB interface
You can use the USB interface to connect a USB
printer or a USB memory stick.
➆Power
After connecting the cable to the device, turn the
bayonet connector 90° clockwise until it clicks into
place.
Use only the supplied power adapter.
Config (Com)ETH 1ETH 2ETH 3WAN
Gigabit Ethernet 10/100/1000
USBDC 12 V
Ant 2Ant 1
➁➃➀➄➂➀➅ ➆
➀ ➂➄➁➅➃➆
LANCOM 1790-4G+
Hardware Quick Reference
iPlease observe the following when setting up the device
Before initial startup, please make sure to take notice of the information
regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a
nearby power socket that is freely accessible at all times.
LED description & technical details
Mounting & connecting
➃ ETH
➄ 4G
➅ VPN
➆ Reset
➀ Power
➁ Online
➂ WAN
Cloud-ready
Produktspecifikationer
| Varumärke: | Lancom |
| Kategori: | Router |
| Modell: | 1790-4G+ |
Behöver du hjälp?
Om du behöver hjälp med Lancom 1790-4G+ ställ en fråga nedan och andra användare kommer att svara dig