Lancom L-151gn Wireless Bruksanvisning

Läs gratis den bruksanvisning för Lancom L-151gn Wireless (1 sidor) i kategorin Övrigt - Övrigt. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4 recensioner. Har du en fråga om Lancom L-151gn Wireless eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

 L-151gn Wireless







LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.

No liability for technical errors and/or omissions. 110893/0214



Screw the WLAN antennas supplied onto the con-

nectors Ant 1 and Ant 2. Depending on how the

antennas are to be used, the 'Antenna Grouping'

may need to be congured in order to ensure the

desired MIMO behavior.

a



Use the cable with the kiwi-

colored connectors to connect

the interfaces ETH to your PC or

a LAN switch.

b

a

OffDevice switched off

Green, on

(permanently)

Device operational

Blinking greenConguration password not set. Without a

conguration password, the conguration

data in the device is unprotected.

4







1For devices to be

operated on the

desktop, please attach

the adhesive rubber

footpads

1Do not rest any objects

on top of the device

1Keep the ventilation

slots on the side of

the device clear of

obstruction

1In case of wall

mounting, use the

drilling template as

supplied

1Lockable wall mounting

with the LANCOM Wall

Mount (available as an

accessory).

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

c



When connecting the

cable to the device, turn

the bayonet connector

90° clockwise until it

clicks into place.

Use only the supplied

power adapter.

If you operate separately purchased antennas, please ensure that you do not exceed

the maximum allowed transmission power for your system. The system

operator is responsible for adhering to the threshold values.

Antennas are only to be attached or changed when the device is switched

off. Mounting or demounting antennas while the device switched on may

cause the destruction of the WLAN module!

5



Power supply12 V DC, external power adapter (110 or 230V) with bayonet connector to secure against

disconnection

Power consumptionApprox. 5 watt via 12V/1.5A power adapter (value refers to the overall power for the access

point and power adapter), about 4.3 watts via PoE

EnvironmentTemperature range 0 – 50°C; humidity 0 – 95%; non-condensing

HousingRobust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures

210 x 45 x 140 mm (W x H x D)

Number of fansNone; fanless design, no rotating parts, high MTBF



Frequency band 2400-2483.5 MHz (ISM) (restrictions vary between countries)

Radio channels 2.4

GHz

Up to 13 channels, max. 3 non-overlapping (2.4-GHz band)



ETH10/100 Base-TX, autosensing, auto node hub, PoE compliant with IEEE 802.3af

DSL over LAN (DSLoL)The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external

DSL modems (PPPoE) or external routers.

External antenna

connectors

Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for anten-

nas from other vendors.



CEEN 301 489-1, EN 301 489-17, EN 60950-1

2.4-GHz WLANETS 300 328

NoticationsCertications notied in Germany, Belgium, Netherlands, Luxembourg, Austria, Spain, Switzer-

land, UK, Italy, Portugal, Czech Republic, Denmark, Malta, France



ManualQuick Installation Guide (DE/EN/FR/ES/IT/PT/NL)

CD/DVDCD/DVD with rmware, management software (LANcong, LANmonitor, LANCAPI) and

documentation

CableEthernet cable, 3m (LAN: kiwi-colored connectors; WAN: green connectors)

AntennasTwo 3-dBi dipole antennas

Power adapterExternal power adapter, NEST 12 V/1.5 A DC/S, barrel connector 2.1/5.5 mm bayonet,

LANCOM item no. 110723 (EU, 230 V), LANCOM item no. 110829 (UK, 230 V)

License information for the device rmware (LCOS) is available in

the le LCOS-Licenses.txt on the data medium supplied.

b

OffNo WLAN network dened or WLAN

module deactivated. The WLAN module is

not transmitting beacons.

GreenAt least one WLAN network is dened

and WLAN module activated. The WLAN

module is transmitting beacons.

Green inverse

ashing

Number of ashes = number of connected

WLAN stations, followed by a pause

(default).

Alternatively the frequency of the ashing

can indicate signal strength between the

access point and the device operating in

client mode.

c

OffNo networking device attached

Green, on (perma-

nently)

Connection to network device operational,

no data trafc

Flickering green Data trafc

A6C8DBA"&*&\cL^gZaZhh

LA6CA^c`

EdlZg

:I=

a bc

:I="&&%$&%%

6ci&

GZhZi

6ci'

b c

a

                        

Produktspecifikationer