Lanzar Vibe 248 Bruksanvisning

Lanzar bilradio Vibe 248

Läs gratis den bruksanvisning för Lanzar Vibe 248 (16 sidor) i kategorin bilradio. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 3 recensioner. Har du en fråga om Lanzar Vibe 248 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

Viberant Owner’s Manual

Congratulations on your purchase of a Lanzar Viberant amplifier. You have purchased a quality product designed

and engineered to give you many years of uncompromised musical service. Vibe amplifiers are designed with the

latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges

found on modern CD's and recordings.

TABLE OF CONTENTS

Table of Contents

Feature and Controls

1. Vibe218/228/238/248/258/268

2. Vibe418/428/438

3. Installation

4. Specifications

System Wiring

6. 2 channel stereo

7. 2 channel bridged mode

8. 2 channel tri-mode

9. 2 channel triamp system

10. 4 channel stereo

11. 4 channel bridged mode

12. 4 channel tri-mode

13. Precautions

14. Troubleshooting

Viberant Owner’s Manual- 1

Features and Controls

vibe 218/228/238/248/258/268

1 2 37 6 5 1 2 37 6 5

1. INPUT LEVEL CONTROLS

Enables the matching of input levels to the output levels from

head unit (or other signal source).

2. CROSSOVER MODE SELECTOR

Determines the mode of built-in crossover:

low pass (permits only low frequency signals to pass to

speakers),high pass (permits only high frequency signals to pass

to speakers), or flat.

3. BASS BOOST CONTROL

With a bass boost switch engaged, the bass level is increased

approx 18dB.

4. REMOTE BASS BOOST (Vibe228/238/248/258/268)

Plug in the remote bass boost control wire in here

5. POWER & PROTECTION INDICATORS

Provide instant information on status of amplifier, including

short-circuit and thermal overload alerts.

6. HIGH PASS FILTER (HPF)

When Crossover Mode Selector is in High Pass Mode, this control

limits the frequencies which will be distributed to the speakers

to those below the value to which this is set within the range 80-

2.5KHz.

7. LOW PASS FILTER (LPF)

When Crossover Mode Selector is in Low Pass Mode, this control

limits the frequencies which will be distributed to the speakers

to those below the value to which this is set within the range 35-

400Hz.

vibe218

Viberant Owner’s Manual2-

Features and Controls

vibe 418/428/438

2 3 476 2 3 4765 2 3 476 2 3 47651

1. REMOTE BASS BOOST (vibe428/438)

Plug in the remote bass boost control wire in here

2. INPUT LEVEL CONTROLS

Enables the matching of input levels to the output levels from

head unit (or other signal source).

3. CROSSOVER MODE SELECTOR

Determines the mode of built-in crossover:

low pass (permits only low frequency signals to pass to speakers),

high pass (permits only high frequency signals to pass to speakers),

or flat.

4. BASS BOOST CONTROL

With a bass boost switch engaged, the bass level is increased

approx 18dB.

5. POWER & PROTECTION INDICATORS

Provide instant information on status of amplifier, including

short-circuit and thermal overload alerts.

6. HIGH PASS FILTER (HPF)

When Crossover Mode Selector is in High Pass Mode, this control

limits the frequencies which will be distributed to the speakers

to those below the value to which this is set within the range 80-

2.5KHz.

7. LOW PASS FILTER (LPF)

When Crossover Mode Selector is in Low Pass Mode, this control

limits the frequencies which will be distributed to the speakers

to those below the value to which this is set within the range 35-

400 Hz.

vibe418

Produktspecifikationer

Varumärke:	Lanzar
Kategori:	bilradio
Modell:	Vibe 248
Grafikadapter:	HD Graphics
Ethernet LAN:	Ja
Maximal upplösning:	4096 x 2304 Pixels
Typ av strömkälla:	ATX
Medföljande kablar:	SATA
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	2
Certifiering:	FCC, CE, WHQL, ErP/EuP ready (ErP/EuP ready power supply is required)
HDCP:	Ja
Antal DisplayPorts:	1
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	6
Processoruttag:	LGA 1150 (Socket H3)
Processorfabrikant:	Intel
Maximalt internminne:	32 GB
Intel® Smart Response Technology:	Ja
Intel® Turbo Boost-teknik:	2.0
Intel® Virtualization Technology for Directed I/O (VT-d):	Nee
Ljudutgångskanaler:	7.1 kanalen
Ethernet-gränssnittstyp:	Gigabit Ethernet
DVI-I-portar:	1
Chipset moderkort:	Intel® Z97
DisplayPort-version:	1.2
Typ av minnesplats:	DIMM
Intel® vPro™-plattformsberättigande:	Nee
Ljudchip:	Realtek ALC1150
Grafikkortsfamilj:	Intel
S/PDIF-utgång:	Ja
Intel® Rapid Storage Technology:	Ja
Minneskanal:	Dubbelkanaals
PCI Express x16 (Gen 3.x)-platser:	2
Antal skärmar som stöds:	3
Gränssnitt för lagringsenheter som stöds:	M.2, SATA II
PS/2-port(ar):	1
Komponent för:	PC
LAN-kontroller:	Intel I218-V, Realtek RTL8111GR
Typer av RAID:	0, 1,5, 10
Maximalt minne grafikadapter:	512 MB
DirectX version:	11.1
Antal SATA III-kontakter:	10
Icke-ECC:	Ja
Vakna på LAN:	Ja
Kompatibla processorer:	Intel Celeron, Intel Pentium
Minnestyper som stöds:	DDR3-SDRAM, DDR3L-SDRAM
Antal eSATA/USB 2.0-portar:	1
PCI Express x1 (Gen 2.x)-platser:	2
Moderkort chipset familj:	Intel
Moderkorts formfaktor:	ATX
Antal minnesplatser:	4
Minnesklockhastigheter som stöds:	1066,1333,1600,1866,2133,2400,2800,2933,3200 MHz
BIOS-typ:	UEFI AMI
BIOS-minnesstorlek:	16 Mbit
ACPI-version:	1.1
Stöd för parallell bearbetning:	Quad-GPU CrossFireX, Quad-GPU SLI
COM-anslutningar:	1
Anslutning för CPU-kylare:	Ja
ATX-strömkontakt (24-stift):	Ja
Frontpanelkontakt:	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
Obuffrat minne:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar:	2
TPM-kontakt:	Ja
Konfliktfri:	Ja
Intel® Core i3/i5/i7/i9-serien:	i3-4xxx, i3-5xxx, i5-4xxx, i5-5xxx, i7-4xxx, i7-5xxx
Diskret grafikstöd:	Ja
PCI Express x16 (Gen 2.x)-platser:	1
Intel® Extreme Memory Profile (XMP):	Ja
Antal M.2 (M) platser:	1
Thunderbolt-headers:	1
Antal SATA Express-kontakter:	1
PCI Express-strömkontakter (6-stift):	1