LD Systems DSP 44 K PB Bruksanvisning
LD Systems
mottagare
DSP 44 K PB
Läs gratis den bruksanvisning för LD Systems DSP 44 K PB (2 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 2.5 recensioner. Har du en fråga om LD Systems DSP 44 K PB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
USER´S MANUAL
DSP 44 K PB / DSP 45 K PB
PATCHBAY FOR LDDSP44K AND LDDSP45K POWER AMPS
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. During installation, observe the applicable safety regulations for your country.
7. Never place sources of ignition, e.g., burning candles, on the equipment.
8. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in
this case, observe the special instructions noted below. Do not expose this equipment to flammable materials,
fluids or gases.
9. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with
liquids, such as vases or drinking vessels, on the equipment.
10. Make certain that objects cannot fall into the device.
11. Use this equipment only with the accessories recommended and intended by the manufacturer.
12. Do not open or modify this equipment.
13. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
14. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
15. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if
it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a
powered device). This equipment may only be repaired by authorized, qualified personnel.
16. Clean the equipment using a dry cloth.
17. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
18. Plastic bags must be kept out of reach of children.
CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the
respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is ob-
ligated to notify you formally about the existence of potential health risks. Hearing damage due to high volume
and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL) that
can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid
prolonged exposure to volumes in excess of 90 dB.
To prevent possible hearing damage, avoid listening at high volume levels over long periods of time.
Even exposure to short bursts of loud noise can result in hearing loss. Please keep the volume
constantly at a comfortable level.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach
/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal
CE CONFORMITY
Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):
R&TTE (1999/5/EC) or RED (2014/53/EU) from June 2017 / Low-voltage directive (2014/35/EU)
EMC Directive (2014/30/EU) / RoHS (2011/65/EU) / The full declaration of conformity can be found at www.adam-
hall.com. You can also request it via info@adamhall.com
CONNECTIONS, CONTROLS AND MOUNTING
The patchbay serves to make connections on the back of the LD Systems power amplifiers DSP44K and DSP45K
freely accessible at the front of the rack in the event of rack installation. Install the patchbay in a suitable rack
underneath the relevant power amplifier and connect the cables of the patchbay to the sockets of the power
amplifier.
CONNECTIONS
1
ETHERNET
Ethernet interface for management and remote control of the power amplifier via computer.
2
DANTE™ (LDDSP44KPB only)
Dante™ interface for the transmission of digital audio signals.
3
IN CH-1 - CH-4
Line inputs 1 to 4 with female 3-pin XLR sockets.
4
LINK CH-1 + CH-2
Link outputs for channels 1 and 2 (3-pin XLR, male).
5
OUT CH-A/B & CH-C/D
Speakon speaker outputs.
Socket assignment OUT CH-A/B: plus 1 & minus 1 = CH-A / plus 2 & minus 2 = CH-B⊕ ⊖ ⊕ ⊖
Socket assignment OUT CH-C/D: plus 1 & minus 1 = CH-C / plus 2 & minus 2 = CH-D⊕ ⊖ ⊕ ⊖
Socket assignment OUT CH A/B BRD: plus 1 & minus 2⊕ ⊖
Socket assignment OUT CH C/D BRD: plus 1 & minus 2⊕ ⊖
6
OUT CH-B & CH-D
Speakon speaker outputs. Pins 2 and 2 of sockets CH-A/B and CH-C/D are directly connected to pins 1⊕ ⊖ ⊕
and 1 of sockets CH-B and CH-D.⊖
Socket assignment OUT CH-B and CH-D: plus 1 & minus 1⊕ ⊖
SPECIFICATIONS
EN
Product number: LDDSP44KPB LDDSP45KPB
Product type: Patchbay for LDDSP44K Patchbay for LDDSP45K
Construction type: 19", 1 U 19", 1 U
Connections: Ethernet, Dante™, 4x Line In,
2x Link Out, 4x Speakon Out (all
sockets by Neutrik)
Ethernet, 4x Line In, 2x Link Out,
4x Speakon Out (all sockets by
Neutrik)
Material: Steel Steel
Material thickness: 1.5 mm 1.5 mm
Surface: Powder coated Powder coated
Colour: Black Black
Dimensions (W x H): 483 x 44.5 mm 483 x 44.5 mm
Weight: 1.5 kg 1.5 kg
Additional features: All connections are fitted at the
back with cables for direct link to
the power amplifier (cable length
approx. 50 cm)
All connections are fitted at the
back with cables for direct link to
the power amplifier (cable length
approx. 50 cm)
1 2 3 4 3 4 3 3 5 6 5 6
Produktspecifikationer
| Varumärke: | LD Systems |
| Kategori: | mottagare |
| Modell: | DSP 44 K PB |
Behöver du hjälp?
Om du behöver hjälp med LD Systems DSP 44 K PB ställ en fråga nedan och andra användare kommer att svara dig
mottagare LD Systems Manualer
22 September 2024
17 September 2024
10 September 2024
3 September 2024
24 Augusti 2024
24 Augusti 2024
23 Augusti 2024
20 Augusti 2024
13 Augusti 2024
11 Augusti 2024
mottagare Manualer
- Ibanez
- Inovonics
- Camecho
- Seco-Larm
- Linn
- Luxman
- LEA
- Akg
- Definitive Technology
- Pure Acoustics
- ATen
- Hartke
- Sirus
- Adastra
- Audac
Nyaste mottagare Manualer
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025