Lectrosonics SSM/E02 Bruksanvisning


Läs gratis den bruksanvisning för Lectrosonics SSM/E02 (24 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5.5 recensioner. Har du en fråga om Lectrosonics SSM/E02 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/24
SSM
Digital Hybrid Wireless
®
Micro Transmitter
SSM, SSM-941, SSM/E01, SSM/E01-B2, SSM/E02, SSM/E06, SSM/X
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
Quick Start Steps
1) Install a good battery and turn power on (see pages
5 and 8).
2) Set the compatibility mode to match the receiver
(see page 9).
3) Connect the signal source and adjust input gain for
optimum modulation level (see page 10).
4) Set Step Size and frequency to match receiver (see
pages 8 and 9). Also refer to the receiver manual for
the RF scanning procedure to nd a clear operating
frequency.
5) Turn on the receiver and verify that solid RF and
audio signals are present (see receiver manual).
WARNING: Moisture, including talent’s sweat,
will damage the transmitter. Wrap the SSM
in a plastic bag or other protection or use the
SSMCVR to avoid damage.


Produktspecifikationer

Varumärke: Lectrosonics
Kategori: ej kategoriserat
Modell: SSM/E02

Behöver du hjälp?

Om du behöver hjälp med Lectrosonics SSM/E02 ställ en fråga nedan och andra användare kommer att svara dig