Lenco CS-410 Bruksanvisning
Läs gratis den bruksanvisning för Lenco CS-410 (24 sidor) i kategorin bilradio. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om Lenco CS-410 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/24
CS-410
INSTRUCTION MANUAL
AM/FM-RDS DIGITAL PLL TUNING RADIO
SD/MMC/USB/MP3 PLAYER
www.lenco.eu
1
OPERATING THE UIIT
1.- RESET BUTTON
The unit must be reset under the following conditions:
A) Prior to using this unit for the first time after installation.
B) If the unit fails to operate properly, press the RESET with a pen tip or other pointed instrument.
2. - SEL & VOL CONTROL BUTTON
A) Press the SEL repeatedly to select VOLUME - BASS - TREBLE - BALANCE - FADER.
B)Press SEL button and hold for more than 2 seconds to turn on TA ON/OFF mode, then press SEL button shortly and
repeatedly
to select AF ON/OFF,TA SEEK/TA ALARM PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASKDPI/MASK ALL,
BEEP ON/BEEP OFF, USER SET(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA , STEREO/MONO(in FM mode),
LOUD OFF/LOUD ON,DX/LOCAL (in FM mode), CLK ON/CLK OFF,CLK 12/24 mode.
After selecting the desired mode, rotate the VOL- or VOL+ button to select one setup item of the desired mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5seconds,the radio retunes to next
station which has adifferent PI to the last station,but has the TPinformation. When TP information gets lost at the current
station for retune time which is set byRETUNE SHORT(90 seconds) or RETUNE LONG(150seconds), the radio starts
to retune to next same PIstation. When same PI station does not receive in 1cyclic search,the radio retunes to next
station with TP information.
TA ALARM mode: when this mode is selected, any autoretune mode is not activated. Only double beep sound (ALARM)
will be heard.When newly tuned station does not have TP information for 5 seconds, beeps are sounded.
When TP information gets lost at the current station for retune time, the beep sound will be heard.When newly tuned
station has no RDS signal, PI SEEK is suppressed .
2) PI SOUND/ PI MUTE:
PI SOUND mode: if a car cruises between buildings that could cause reflectinsignals, a phenomenon may occur, dueto
different PI codes being received from the sameAF source. when different PI sounds (DIP) are heard occassionally, this
will happen for less than 1 second.PI MUTE mode: under above same situation, a mute sound will be heard for less
than1second.
3) RETUNE L / RETUNE S:
The initial time of auto TA search or PI SEARCH mode is selected. When PI information is not received forretune
interval , the radio starts to retune to next same PI station.When same PI station does not receive 1 cyclic search, the
radio goes to last stationand waits for 4-5 minutes until PI code is received.
RETUNE L mode: selected as 150 seconds.
RETUNE S mode: selected as 90 seconds.
4) MASK DPI/MASK ALL:
MASK DPI mode: masks only the AF which has different PI.
MASK ALL mode: masks the AF which has different PI and NO RDS signal with high field strength.
5)BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
6) VOL LAST/VOL DEFA
VOL LAST: The radio switches on at the actual volume it had when it was last switched off.
VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can pre-select a constant switch-on volume by
using the VOL knob.
7)CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
3. -POWER ON/OFF AND MUTE
Press the POWER to turn on this unit. To turn off theunit, press and hold this button unit it off.
During playing, press this to mute the sound.
4. - LCD DISPLAY
2
5. - MODE PTY BUTTON
Press the MODE to select RADIO/CARD(SD/MMCcard inserted)/USB(flash driver inserted)/AUX mode.
Press the button longer than 2 seconds to select the following mode: POP M- - NEWS while selecting PTY TYPE, its
selection
is implemented by present buttons as describe in present key,(press one of the 6 present buttons shortly and repeatedly to
select
the PTY TYPE in the present button)When POP M or NEWS is on, the previous PTY program and PTY word is displayed
on LCD. If there are no keys entered for 2 seconds, previously selected PTY is searched.
If desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY icon goes off.
6&7. - TUNE,SEEK, TRACK, SKIP UP/DOWNBUTTONS
A) Radio mode
Press the>>I or I<< to perform manual seek tuning. Press and hold the >>I or I<< to perform automatic tuning.
The unit will tune to the station with strong signal.
B) SD/MMC, and USB mode
Press the >>I or I<< to play the next or previous track.
8. - BAND & AP BUTTON
Press the BAND to select radio band as follow: Fm1 -> FM2 -> FM3 -> MW1 -> MW2
Press and hold this button to activate the auto storage function. The unit scans and preset the stations with strongest
signal.(18stations in FM , 12 stations in MW )
9. - CLOCK BUTTON
Press the CLK button briefly to display time for 5 seconds then press and hold the CLK button for more than 1sencond
until the real time flashes on the display and then you can adjust the time by the SEL button.
10-15. - PRESET STATIONS MEMORY AND >II, INT, RPT, RDM BUTTONS
A) Radio mode
Press the 1-6 buttons to select the preset stations.
Press and hold the 1-6 buttons to store the station that currently listening.
B) SD/MMC, and USB mode
Press the >II to pause or resume playing. Press the INT to play the first 10 seconds of the tracks.
Press again to off this function and the current track will keep playing.
Press the RPT once to repeat plays the current track.Press the RPT twice to repeat plays the current folder.
Press the RDM to turn random play on or off.
Press the 5/6 to move up or down 10 tracks at a time(Note: when the remaining tracks less than 10, this function is invalid)
During playback, press and hold the +10 to select the next folder to be play.
16.-AUX JACK
Press the MODE to select auxiliary input playing mode when connecting with external audiodevice.
17.-SD/MMC CARD SLOT
When SD/MMC card is inserted,the unit is automatically switched to SD/MMC mode.(Note:if both USB storage device
and SD/MMC card inserted,the system will switch to the mode of the latest connected.)
18.-USB PORT
When USB storage device is connected, the unit is automatically switched to USB mode.
INSTALLATION METHOD
Produktspecifikationer
| Varumärke: | Lenco |
| Kategori: | bilradio |
| Modell: | CS-410 |
| Färg på produkten: | Black, White |
| Vikt: | 2880 g |
| Bredd: | 378.5 mm |
| Djup: | 258 mm |
| Förpackningens bredd: | 450 mm |
| Djuppackning: | 160 mm |
| Förpackningshöjd: | 345 mm |
| Användarmanual: | Ja |
| Blåtand: | Nee |
| Skärm diagonal: | 15.6 " |
| Upplösning: | 1366 x 768 Pixels |
| Pekskärm: | Nee |
| Original bildförhållande: | 16:9 |
| Processorfrekvens: | 2.1 GHz |
| Processorfamilj: | Intel® Pentium® Dual-Core |
| Processormodel: | T4300 |
| Antal processorkärnor: | 2 |
| Wi-Fi-standarder: | 802.11b, 802.11g |
| Vormfaktor: | Clamshell |
| Inkluderar operativsystem: | Windows 7 Home Premium |
| Typ av anslutningskontakt: | 3,5 mm |
| Ethernet LAN: | Ja |
| Medföljande kablar: | AC |
| Integrerad minneskortläsare: | Ja |
| Kompatibla minneskort: | Memory Stick (MS), MMC, MS PRO, SD, xD |
| Ljudsystem: | SRS Premium Sound |
| Processor litografi: | 45 nm |
| Snabbstartsguide: | Ja |
| Garantikort: | Ja |
| Inkluderar AC-adapter: | Ja |
| Ursprungsland: | China |
| LED-bakgrundsbelysning: | Ja |
| Antal USB 2.0-portar: | 4 |
| VGA (D-Sub) port(ar): | 1 |
| Antal HDMI-portar: | 1 |
| Mikrofon, linjeingång: | Ja |
| DVI-port: | Nee |
| Antal Ethernet LAN (RJ-45)-portar: | 1 |
| Monteringsalternativ för kabellås: | Nee |
| Antal inbyggda högtalare: | 2 |
| Hörlursutgångar: | 2 |
| AC-adapter, ström: | 90 W |
| Inbyggd mikrofon: | Ja |
| Internminne: | 4 GB |
| Förvarings media: | HDD |
| Batteritid/batteritid: | - uur |
| Internminnestyp: | DDR3-SDRAM |
| Ethernet LAN, dataöverföringshastigheter: | 10,100,1000 Mbit/s |
| Kabelteknik: | 10/100/1000Base-T(X) |
| Nätverksstandard: | IEEE 802.11b, IEEE 802.11g |
| Förvaringstemperatur: | -20 - 60 °C |
| Intel® Wireless Display (Intel® WiDi): | Nee |
| Processoruttag: | Socket 478 |
| Stepping: | R0 |
| Processor antal trådar: | 2 |
| Processorns driftlägen: | 64-bit |
| Processorns cache: | 1 MB |
| Tjunction: | 105 °C |
| Busstyp: | FSB |
| Thermal Design Power (TDP): | 35 W |
| Kodnamnsprocessor: | Penryn |
| Typ av processorcache: | L2 |
| ECC stöds av processor: | Nee |
| Processorfabrikant: | Intel |
| Operativsystems arkitektur: | 64-bit |
| Maximalt internminne: | 8 GB |
| Total lagringskapacitet: | 500 GB |
| Typ av optisk enhet: | DVD Super Multi DL |
| Inbyggd grafikadapter: | Nee |
| Separat grafikadapter: | Ja |
| Inbyggd grafikadaptermodell: | Niet beschikbaar |
| Numerisk knappsats: | Ja |
| Intel® My WiFi Technology (Intel® MWT): | Nee |
| Intel® Hyper Threading Technology (Intel® HT Technology): | Nee |
| Intel® Turbo Boost-teknik: | Nee |
| Intel® Quick Sync-videoteknik: | Nee |
| Intel® InTru™ 3D-teknik: | Nee |
| Intel® Clear Video HD-teknik (Intel® CVT HD): | Nee |
| Intel® Insider™: | Nee |
| Intel® Flex Memory Access: | Nee |
| Intel® AES nya instruktioner (Intel® AES-NI): | Nee |
| Förbättrad Intel SpeedStep-teknik: | Ja |
| Kör Disable Bit: | Ja |
| Termisk övervakningsteknik: | Nee |
| Intel® Enhanced Halt State: | Nee |
| Intel® Clear Video Technology för mobila internetenheter (Intel® CVT för MID): | Nee |
| Intel® VT-x med utökade sidtabeller (EPT): | Nee |
| Inbyggda alternativ tillgängliga: | Nee |
| Intel® 64: | Ja |
| Intel® Virtualization Technology for Directed I/O (VT-d): | Nee |
| Intel® Clear Video-teknik: | Nee |
| Intel® Virtualization Technology (VT-x): | Nee |
| Konfliktfri processor: | Nee |
| ARK ID-processor: | 37253 |
| Intel® Trusted Execution Technology: | Nee |
| Intel® Anti-Theft Technology (Intel® AT): | Nee |
| SmartCard-kortplats: | Nee |
| Förvaringsfuktighet: | 5 - 95 procent |
| Processorkod: | SLGJM |
| Diskret grafikadaptermodell: | AMD Mobility Radeon HD 4530 |
| Pekdon: | Touchpad |
| Windows-tangenter: | Ja |
| Märke av högtalare: | Altec Lansing |
| Minneslayout: | 2 x 2 GB |
| Minnesplatser: | 2x SO-DIMM |
| Minnesformfaktor: | SO-DIMM |
| Bildområde: | Glans |
| Höjd, drift: | -15 - 3048 m |
| Höjd vid förvaring: | -15 - 12192 m |
| Grafikminne: | 0.512 GB |
| Antalet installerade hårddiskar: | 1 |
| HDD kapacitet: | 500 GB |
| HDD-gränssnitt: | SATA |
| HDD rotationshastighet: | 5400 RPM |
| Antal IEEE 1394/Firewire-portar: | 1 |
| CPU-multiplikator (bus/kärnförhållande): | 10.5 |
| FSB-paritet: | Nee |
| Bussprocessor på framsidan: | 800 MHz |
| Bearbetar storleken: | 107 mm² |
| Antal bearbetade transistorer: | 410 M |
| Intel® efterfrågebaserad växling: | Nee |
| Typ av laddningsport: | DC-in ingang |
| Medföljande drivrutiner: | Ja |
| Typ CardBus PCMCIA-slot: | Nee |
| Processorserie: | Intel Pentium T4000 Series for Mobile |
| Maximalt minne för grafikadapter: | 1.79 GB |
| ExpressCard-kortplats: | Ja |
| S/PDIF-utgång: | Nee |
| Höjd (fram): | 34 mm |
| Höjd (bak): | 42 mm |
| Intel® Dual Display Capable Technology: | Nee |
| Intel® FDI-teknik: | Nee |
| Intel® Rapid Storage Technology: | Nee |
| Intel® Fast Memory Access: | Nee |
| Fjärrkontroll ingår: | Ja |
| LightScribe: | Ja |
| Antal eSATA-portar: | 1 |
| Microfoonaansluiting: | 3,5 mm |
| Wifi: | Ja |
| Drifttemperatur (TT): | 5 - 35 °C |
| Relativ luftfuktighet i drift (VV): | 10 - 90 procent |
| Typ produkt: | Notebook |
| Batteriteknik: | Lithium-Ion (Li-Ion) |
| Antal battericeller: | 6 |
Behöver du hjälp?
Om du behöver hjälp med Lenco CS-410 ställ en fråga nedan och andra användare kommer att svara dig
bilradio Lenco Manualer
15 September 2024
29 Augusti 2024
21 Augusti 2024
20 Augusti 2024
14 Augusti 2024
12 Augusti 2024
11 Augusti 2024
10 Augusti 2024
5 Augusti 2024
5 Augusti 2024
bilradio Manualer
- Stinger
- Zenec
- Alpine
- VW
- Fiat
- SPC
- Audiosonic
- Muse
- Marquant
- ECG
- Akai
- Brigmton
- Audio-Technica
- Varta
- Clarion
Nyaste bilradio Manualer
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
27 Juli 2025
25 Juli 2025