Lexicon PCM81 Bruksanvisning
Lexicon
Effektmaskin
PCM81
Läs gratis den bruksanvisning för Lexicon PCM81 (2 sidor) i kategorin Effektmaskin. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 14.5 recensioner. Har du en fråga om Lexicon PCM81 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
PCM 81 Quick Reference Guide
Basic Operation
The PCM 81 has 5 basic modes of operation, selected by pressing: Program Banks, Register Banks, Edit, Control or Tempo
Program Banks
and Register Banks
Press toProgram Banks
cycle through 6 banks of 50
presets. Press Register
Banks to access an internal
bank of 50 registers (or
PCMCIA card banks) where
you can store modied ver-
sions of the factory-loaded
presets.
Each set of PCM 81 controls
is organized into a matrix of
as many as 10 rows and 10
columns.
Simultaneously press Up
and to return to 0.0.Down ←
XXXXXXX XXXXXXXXX✱
3.6 XXXXXXXXXXXXXXXXX
→
↑
↓
SELECT moves you
horizontally across
the matrix.
Your current matrix location is shown in the
lower left of the display. A , an or a P R C
preceding the number indicates you are in a
P R Crogram, egister or ard Bank. If there is no
number shown here, you are in mode.Go
(See .)Edit
Up Down and
move you
vertically
through the
rows of the
matrix.
In , or Edit Control Tempo mode, a ✱
indicates the presence of multiple param-
eters within a single matrix location. Press
Load/✱ to cycle through all of the param-
eters; simultaneously press withLoad/✱
either or to backstep.Up Down
Edit
Press to access allEdit
available parameters for the
currently running eect. Turn
ADJUST to alter the value of
any displayed parameter.
Control
Press Control to access sys-
tem parameters, MIDI con-
trols, and global control of
parameters such as Mix,
Tempo, and Bypass type.
Tempo
Press Tempo to set tempo-
related values that aect the
delay time and LFO rate pa-
rameters of the currently
running eect.
In , or Edit Control Tempo mode, ADJUST scrolls
through the range of available settings for the displayed
control . In Program Banks and Register Banks mode,
ADJUST is patched to one or more eect parameters.
To set PCM 81 tempo rate,
press Tempo. Use SELECT
and Up and Down to locate
matrix position 0.0. Turn AD-
JUST to select any Tempo
Rate from 40-400 BPM.
Any PCM 81 delay param-
eter (as many as 10 in some
eects) and any time-based
modulator can be individu-
ally assigned an absolute
time or tempo value.
You can set delay times in
milliseconds, or in a ratio of
echoes/beats which are
linked to tempo. When you
change tempo, the delay
times will change to main-
tain the same rhythm at the
new tempo.
Note: You can set and display delay values in units of time, or
with tempo values. Whenever a delay value is displayed in Edit
mode, press Up and Tempo simultaneously to toggle these two
options.
The PCM 81 oers an exten-
sive set of informative dis-
play messages which can be
activated from the front
panel. If you want to know
more about the function of a
particular button —without
actually executing any ac-
tion — press and hold the
button down. While you are
holding down the button, an
explanatory message will
appear on the display.
Or, press twice inTap
rhythm to establish the
tempo rate you want. Tap is
always active, allowing you
to change tempo on the y.
Tempo Info
Simultaneously press the
Banks button with either Up
or to backstepDown
through the banks.
Turn SELECT to view all of
the eects in the selected
bank. A ✱ in front of an eect
name indicates that the ef-
fect is not loaded. Hold down
either Banks button to see
the name of the currently
running eect.
Press to load anyLoad/✱
displayed eect.
ADJUST acts as a soft knob
for adjustment of one or more
patched eect parameters.
Lexicon Part No. 070-12615
Produktspecifikationer
| Varumärke: | Lexicon |
| Kategori: | Effektmaskin |
| Modell: | PCM81 |
Behöver du hjälp?
Om du behöver hjälp med Lexicon PCM81 ställ en fråga nedan och andra användare kommer att svara dig
Effektmaskin Lexicon Manualer
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
Effektmaskin Manualer
- Steren
- JB Systems
- XPower
- Smoke Factory
- IMG Stage Line
- QTX
- NGS
- Valcom
- DJ Power
- Party Light & Sound
- TCM FX
- Pyle
- Evo-Lite
- Mooer
- Viking
Nyaste Effektmaskin Manualer
13 Oktober 2025
12 Oktober 2025
11 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
5 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025