Lexmark T522 Bruksanvisning

Lexmark Skrivare T522

Läs gratis den bruksanvisning för Lexmark T522 (2 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 7 recensioner. Har du en fråga om Lexmark T522 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Quick Reference

Lexmark Laser Printer

Operator panel

Press Menu to:

• Enter the menus from the ready state

• Scroll through menus or values

• Increase or decrease a numerical value

• Display the Job Menu while the printer is busy

Press Select to:

• Select the item on the second line of the display

• Save the selection as a new default setting

Press Return to:

• Return to the previous menu level

Press Go to:

• Exit printer menus and return to the Ready state

• Clear messages

Press Stop to:

• Temporarily stop all print activity without losing

data

Loading a paper tray

Complete these instructions to load print materials into any of the standard or

optional trays. All paper trays are loaded the same way.

1 Remove the paper tray.

2 Pull the width guide tab and slide the width guide to the far right side of

the tray.

3 Squeeze the length guide lever and slide the length guide to the correct

position for the size paper you are loading.

4 Place the paper into the paper tray with the recommended print side face

down for single-sided printing and face up for double-sided printing. Do

not fill paper above the paper capacity mark (fill line).

Pull the width guide tab and slide the width guide to the left until it lightly rests

against the edge of the paper stack.

Loading the multipurpose feeder

1 Push the lower release latch.

2 Pull the metal bar out far enough to support your paper size.

3 Slide the paper width guide to the far right.

Supported print material sizes and types

Types:

Sizes:

Loading letterhead

Letterhead must be loaded differently depending on whether you want your print

job to be single-sided or double-sided (duplexed).

Ready

Select

Return

Stop

Pull here

Length

guide

Paper size

indicators

Width

guide

Length guide

lever

Paper and transparencies Envelopes

Plain Paper Labels Preprinted Envelope

Card Stock Bond Colored Paper

Transparency Letterhead Custom Type <x>

Letter A4 B4 Folio* 9 Envelope

Legal A5 JIS-B5 Statement* DL Envelope

Executive B5 Envelope

C5 Envelope

7 3/4 Envelope

10 Envelope

Other Envelope

*This size is not available until Size Sensing is turned off. For more information, refer to

the online information.

In a paper tray

In the multipurpose

feeder

Single-sided printing

Double-sided

(duplex) printing

Printed in USA

This document is printed on recycled paper. 5/01

E.C. 2H0003 P/N 09H0412

Produktspecifikationer

Varumärke:	Lexmark
Kategori:	Skrivare
Modell:	T522
Vikt:	20411.7 g
Färg:	Nej
Maximal upplösning:	1200 x 1200 DPI
Internminne:	16 MB
Processor:	250 MHz
Kompatibla operativsystem:	Mac OS 8.6 - 9.x\nApple Mac OS X
Dubbelsidig utskrift:	Ja
Produktstorlek (BxDxH):	419.100 x 513.080 x 378.460 mm
Mac-kompatibel:	Ja
Nätverksförberedd:	Ja
Utskriftsteknologi:	laser
Utskriftshastighet (Svart, normalkvalitet, A4/US Brev):	25 ppm
Tid för första utskrift (svart):	9 s
Maximal inmatningskapacitet:	4100 ark
Total inmatningskapacitet:	600 ark
Maximal utmatningskapacitet:	250 ark
Pappersfackets typ av media:	Bond paper, Envelopes, Labels, Plain paper, Transparencies
Icke-ISO utskriftsmaterial av olika storlek:	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Ljudtrycksnivå (utskrivning):	51 dB
Ljudeffektsnivå (vänteläge):	30 dB
Flerfunktionsfack, kapacitet:	100 ark
Flerfunktionsfack:	Ja