Liftmaster CAPXSHOOD Bruksanvisning

Liftmaster Inte kategoriserad CAPXSHOOD

Läs gratis den bruksanvisning för Liftmaster CAPXSHOOD (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 18 recensioner. Har du en fråga om Liftmaster CAPXSHOOD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

TRIM PLATES AND HOOD

MODELS: CAPXSTK, CAPXSTKPL, AND CAPXSHOOD

INTRODUCTION

The CAPXSTK and CAPXSTKPL are available to conceal the replacement of

an existing telephone entry system or buzzer with a CAPXS. The CAPXSTK

is a standard trim plate, and the CAPXSTKPL provides a postal lock

provision for buildings that require the integration of a postal lock.

CAPXSTKPL INSTALLATION

CARTON INVENTORY

Trim Panel, Postal Lock Cover, (4) #10 Phillips Screw and Hex Nut, (4)

#8T20 Torx Screw

ADDITIONAL ITEMS YOU MAY NEED

Silicone Sealant, Phillips Screwdriver, T20 Screw Driver/Bit, Mounting

Hardware per CAPXS Installation manual, Postal Lock Device (provided by

USPS)

POSTAL LOCK INSTALLATION

1. Fasten Postal Lock to Trim Panel using #10 Phillips screws and hex

nuts provided. (See Figure 1)

2. Verify switch is depressed while in the locked position. Adjust as

needed. (See inset of Figure 1)

3. Position Cover over Postal Lock. Make sure that sealing gasket is

properly seated. (See Figure 2)

4. Secure the Cover over the Postal Lock from the rear using #8 T20

Screws.

5. Make sure Postal Lock Switch wires are routed through the wire egress

opening. (See inset of Figure 1)

6. Fasten to the gang box or wall through the Mounting Bracket and Trim

Panel using the hardware speciﬁed in the CAPXS Installation Manual.

(See Figure 3)

7. Silicone Sealant can be used on the rear edge of the trim panel or along

the mating edge after installation.

8. Follow CAPXS manual to ﬁnish the installation. (See Figure 4)

WARNING: This product can expose you to chemicals

including lead, which are known to the State of California to

cause cancer or birth defects or other reproductive harm. For

more information go to www.P65Warnings.ca.gov.

Figure 1

Figure 3

Figure 2

Figure 4

CAPXSTKPL

Postal Lock

(not provided)

Cover

CAPXS

Bracket

Produktspecifikationer

Varumärke:	Liftmaster
Kategori:	Inte kategoriserad
Modell:	CAPXSHOOD
Vikt:	20000 g
Bredd:	700 mm
Höjd (min):	1220 mm
Höjd (max):	1290 mm
Ramfärg:	Zwart
Antal per paket:	1 stuk(s)
Typ produkt:	PC-gamestoel
Hjulhjul:	Ja
Nackstöd:	Ja
Typ av stol:	Gecapitonneerde zitting
Färg på sätet:	Black, Orange
Typ av ryggstöd:	Gecapitonneerde rugleuning
Ryggstödets färg:	Black, Orange
Armstöd:	Ja
Justerbart armstöd:	Ja
Inklusive racinghjul/flygläge:	Nee
Zitbreedte:	550 mm
Sitthöjd (max):	470 mm
Ryggstödsmaterial:	Foam, Polyurethane (PU)
Sitsmaterial:	Foam, Polyurethane
Ryggstödets bredd:	615 mm