Lincoln Electric VIKING ArcSpecs Bruksanvisning
Lincoln Electric
Inte kategoriserad
VIKING ArcSpecs
Läs gratis den bruksanvisning för Lincoln Electric VIKING ArcSpecs (19 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om Lincoln Electric VIKING ArcSpecs eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/19
GRAPHICS MAY VARY
Operator’s Manual
VIKING
™
ArcSpecs
™
Auto-Darkening Welding Goggles
with 4C
™
Technology
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IM10544 | Issue D ate Aug-19
© Lincoln Global, Inc. All Rights Reserved.
TABLE OF CONTENT Page
SAFETY WARNINGS – READ BEFORE USING 1
WELDING GOGGLE INFORMATION 2
SPECIFICATIONS 3
OPERATING INSTRUCTIONS 4
GOGGLE OPERATIONS/FEATURES 5
GRIND BUTTON OPERATION 8
GOGGLE CARE AND MAINTENANCE 9
SHADE GUIDE SETTINGS 14
TROUBLESHOOTING 15
WARRANTY INFORMATION 16
REPLACEMENT PARTS, OPTIONAL ACCESSORIES 16
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect goggle and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the goggles.
• Always wear safety glasses or goggles under the welding goggles and protec-
tive clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder's arcs in the immediate area
does not enter in from behind the goggles and auto-darkening filter.
Note: Auto-darkening filters in Lincoln goggles are designed to protect the user against harmful
ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter is
set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which
produce highly toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust or
mechanical ventilation. In confined spaces or in some circumstances,
outdoors, a respirator may be required. Additional precautions are also
required when welding on galvanized steel.
1
WARNING
Refer to http://www.lincolnelectric.com/safety
for additional safety information.
Produktspecifikationer
| Varumärke: | Lincoln Electric |
| Kategori: | Inte kategoriserad |
| Modell: | VIKING ArcSpecs |
Behöver du hjälp?
Om du behöver hjälp med Lincoln Electric VIKING ArcSpecs ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Lincoln Electric Manualer
24 Februari 2025
5 Januari 2025
1 Januari 2025
1 Januari 2025
10 December 2024
10 December 2024
10 December 2024
10 December 2024
Inte kategoriserad Manualer
- Stabila
- Korg
- Spacedec
- Interlogix
- Vantec
- Topeak
- CSL
- Hohner
- Sencor
- IFi Audio
- Cre8audio
- Ninja
- BlueDri
- KidKraft
- BIOS Living
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025