LOG Professional Alpha Bruksanvisning
LOG Professional
högtalare
Alpha
Läs gratis den bruksanvisning för LOG Professional Alpha (13 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9 recensioner. Har du en fråga om LOG Professional Alpha eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/13
Operating Manual
ALPHA
Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessional.com
ALPHA
Operating Manual
Digitally Optimized, Active High-End Studio Monitor
Congratulations on your purchase of a high-quality studio monitor from LOG Professional, manufactured under strict
quality and environmental standards. In order to make optimal use of all performance features, please read these
operating instructions carefully. We advise you to keep this manual for future reference.
Content
Delivered Items 1
Installation 1
Front 2
Back 2
Connecting Audio Sources 3
LED Indicator 4
DIP-Switch-Settings 4
Live-Mode 5
Digital Room Correction 5
Auto-Sleep-Mode 5
Positioning in the Room and Sound Optimization 6
Safety Instructions 7
Repair 7
Maintenance 7
Guarantee and Warranty 7
Disposal 8
Troubleshooting 8
Symbol Denition 9
Technical Data 10
Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessional.com
ALPHA
Operating Manual
Delivered Items
1 x ALPHA studio monitor
1 x Power cord
Installation
- Before unpacking, make sure that you do not touch the loudspeaker chassis when carefully removing the
loudspeaker from the packaging.
- Before placing the ALPHA on a stand, table or mixer, make sure it can support the speaker‘s weight (approx. 7 kg).
Also make sure that the oor is sufciently large to prevent it from tipping over. It is important to pay attention to
the center of gravity.
- As an active studio monitor, the ALPHA requires its own power supply. To do this, connect your ALPHA studio
monitor to your power outlet using the supplied power plug. The power supply unit of the ALPHA accepts mains
voltages between 110 V and 230 V AC and mains frequencies between 50 and 60 Hz. There is no difference in the
power output of the amplier between 110 V and 230 V mains voltage. Make sure that the speaker is only switched
on after it has been connected to the power supply.
Important note: Only connect the loudspeaker to a socket with an earth connection!
Important note: The I/O switch serves as a separation point to de-energize the device.
- Do not place the speaker in direct sunlight or near/over a radiator (or other heat source).
- Do not place objects lled with liquids or open ame sources on the device.
- Leave at least 10 cm of space around the device to ensure adequate air circulation.
- The ambient conditions for this device are +5 to +40 °C with a relative humidity of up to 80%.
Produktspecifikationer
| Varumärke: | LOG Professional |
| Kategori: | högtalare |
| Modell: | Alpha |
Behöver du hjälp?
Om du behöver hjälp med LOG Professional Alpha ställ en fråga nedan och andra användare kommer att svara dig
högtalare LOG Professional Manualer
19 September 2024
19 September 2024
högtalare Manualer
- Airpulse
- Audioengine
- TIC
- Micca
- Atlas Sound
- Eufy
- Monacor
- Lenco
- Bigben
- Soundsation
- Epcom
- Kidsmill
- Ikegami
- Creative
- Gembird
Nyaste högtalare Manualer
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025