Lorex C881DA Bruksanvisning

Lorex övervakningskamera C881DA

Läs nedan 📖 manual på svenska för Lorex C881DA (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Dimensions

5.9” / 150mm

2.8”

71mm

3.2” / 80mm

As our products are subject to continuous improvement, Lorex reserves the right

to modify product design, speciﬁcations and prices, without notice and without

• For a full list of compatible recorders, visit lorex.com/compatibility.

• To ensure that you are viewing camera video in full 4K resolution (4K monitor

required), check the video output resolution of your recorder. For full instructions,

see your recorder’s documentation at lorex.com.

• Not intended for submersion in water. Installation in a sheltered location

recommended.

• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes

between Day/Night viewing modes, an audible clicking noise may be heard from

the camera. This clicking is normal, and indicates that the camera ﬁlter is working.

Disclaimers

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity and voltage levels noted in

the camera’s speciﬁcations.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of intense light.

• Use only the supplied regulated power supply provided with the product. Use of

a non-regulated, non-conforming power supply can damage the product and void

the warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,

chemical-based cleaners.

• The supplied cable is rated for surface and in-wall mounting only. Cables for ﬂoor-

to-ﬂoor installations are sold separately (CMR type). These and other cables are

available at lorex.com.

Safety Precautions

C881DA_QSG_EN_R2

4K Ultra HD Active Deterrence

Security Camera

• 4K Ultra HD Active Deterrence Security Camera

• Mounting Kit*

• BNC / Power Extension Cable*

• Power Adapter**

* Per camera in multi-camera packs.

** A multi-camera power adapter that provides power to multiple

cameras or individual power adapters may be provided depending on

product conﬁguration.

Quick Start Guide

English Version 2.0

C881DA SERIES

Package Contents

ATTENTION:

A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this

camera (included). Use of a non-regulated, non-conforming power supply can

damage this product and voids the warranty.

www.lorex.com

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the Downloads tab

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

Resources

Using Deterrence Features

Use your Lorex app to manually activate the camera's white light and

siren features when connected to a compatible Lorex recorder.

To activate deterrence features manually:

1. Launch the app and tap your recorder to view connected channels.

2. Tap a connected deterrence camera to open it in single-channel view.

3. Tap to activate the white light, or tap to activate the (A) (B)

siren.

NOTE: You can also set schedules and active areas of the camera image where

the white light will be triggered automatically when motion is detected. For full

instructions, refer to the app manual on your product page at lorex.com.

Lorex Cloud

B A

Lorex Home

PREREQUISITE: Connect to your Lorex system using the app

speciﬁed in your recorder documentation.

C881DA_QSG_EN_R2

Cable Extension Options

Option Model Number Cable Length

1CB120URB 120ft (37m)

2CB250URB 250ft (76m)

Extend the cable run for your camera depending on the cable type used. Additional

extension cables sold separately. See table below:

NOTES:

1. The extension cable must be a single stretch of cable between the DVR and

camera. You cannot connect multiple extension cables to each other.

2. Indicators that your cable run may be too long:

• Camera loses video when switching to night vision.

• Video is permanently black & white (even during day time).

• Video is unclear, soft, or distorted.

3. For more information on extension cables, visit .lorex.com

Problem Solution

Picture does not appear to

be 4K

• To ensure that you are viewing camera video in full

4K resolution (4K monitor required), check the video

output resolution of your DVR. For full instructions,

see your DVR’s documentation at .lorex.com

No picture / signal • The camera is only compatible with certain Lorex

DVRs. For full compatibility, visit

lorex.com/compatibility.

• Ensure your monitor is on the correct input channel.

Common terms for input channels: INPUT, AV

CHANNEL, LINE1, LINE2, AUX.

• Ensure connections are properly connected.

• Ensure the camera power supply is plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a source

of light (e.g., sun or spot light).

• Check the brightness settings of the DVR and

monitor.

• Move your camera to a different location.

Picture is too dark • Check the brightness and contrast settings of your

DVR and monitor.

Night vision is not working • The night vision activates when light levels drop. The

area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust, spiderwebs.

Clean the lens with a soft, clean cloth.

• Make sure that the cable run is within the limitations

speciﬁed in the section ‘Cable Extension Options’.

Bright spot in video when

viewing camera at night

• Night vision reﬂects when pointing a camera through

a window. Move the camera to a different location.

The camera warning

light is not switching on

automatically

• Ensure that you have enabled and conﬁgured white

light deterrence using a compatible DVR. See your

DVR’s documentation for full instructions.

• Ensure the active areas and schedule for white light

deterrence are set properly. The default schedule

for the warning light is night times (between 5PM

and 7AM).

The camera siren is not

switching on automatically

• The camera siren cannot switch on automatically.

You can control the camera siren manually using a

compatible Lorex DVR or app. Refer to your DVR’s

documentation for full instructions.

Person and vehicle detection

is not working.

• Support for person and vehicle detection is

deteremined by your recorder. See your recorder’s

documentation to conﬁrm support for this feature.

Troubleshooting

Individual Power Adapter* Multi-Camera Power Adapter*

* Images for representation only.

Connect the male power head

and the BNC connector to the

camera.

Connect the BNC connector

to a video input on your DVR.

Connecting the Camera

Power Adapter Types

A multi-camera power adapter that provides power to multiple cameras

or individual power adapters may be provided, depending on product

conﬁguration.

Connect the female power

head to the included power

adapter.

Camera DVR

Male Power Female Power

Setup Diagram

BNC Video

12V DC Power

Camera

Extension Cable

Power Adapter

HD DVR

To install your camera:

1. Set the camera in the desired mounting position and mark

holes for screws through the camera base.

2. Drill the holes, then feed the cable through the mounting

surface or cable notch.

NOTE: Insert the included drywall anchors if you are

mounting the camera onto drywall.

3. Mount the camera stand to the mounting surface using

the provided screws. Make sure all screws are fastened

tightly.

4. Adjust the camera as shown below:

Installing the Camera

Cable Notch

A. ROTATING THE ARM: Loosen the adjustment ring by turning it

counter-clockwise. Rotate the arm of the camera up to 360°, then

tighten the adjustment ring.

B. BENDING THE ARM: Use a Phillips head screwdriver (not included)

to loosen the adjustment screw. Bend the arm of the camera up to

90°, then tighten the screw.

C. LEVELING THE CAMERA: Use the screwdriver to loosen the

adjustment screw. Rotate the camera until it is level with the viewing

area, then tighten the screw.

ATTENTION:

Test your camera prior to selecting a permanent mounting location by

temporarily connecting the camera and cable to your recorder.

Before Installing the Camera

• Decide whether to run the cables through

the wall / ceiling (drilling required) or

along the wall / ceiling.

• If you run the cables along the wall /

ceiling, you must run the cable through

the cable notch on the base. This will keep

the camera base ﬂush to the surface

when mounted.

5. Remove the vinyl ﬁlm from the camera lens when your

installation is complete.

Produktspecifikationer

Varumärke:	Lorex
Kategori:	övervakningskamera
Modell:	C881DA

Behöver du hjälp?

Om du behöver hjälp med Lorex C881DA ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera Lorex Manualer

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025

Lorex C221NA Bruksanvisning

8 Januari 2025

Lorex C221NC Bruksanvisning

8 Januari 2025

Lorex W463AQ Bruksanvisning

2 Januari 2025

Lorex E891AB Bruksanvisning

7 Oktober 2024

Lorex DP181-42NAE Bruksanvisning

29 September 2024

Lorex E842CA Bruksanvisning

24 September 2024

Lorex E842CAWP Bruksanvisning

24 September 2024

Lorex E842CAB Bruksanvisning

24 September 2024

Lorex LNE45DDW Bruksanvisning

23 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Hikvision DS-2CE56C0T-IRPF Bruksanvisning

5 April 2025

Hikvision DS-2CE10DF8T-FSLN Bruksanvisning

5 April 2025

Hikvision DS-2CD2141G1 Bruksanvisning

5 April 2025

Technaxx TX-192 Bruksanvisning

28 Januari 2025

Bosch AutoDome 800 Bruksanvisning

25 Januari 2025

Wisenet XNV-8080R Bruksanvisning

25 Januari 2025

Philips B120E Bruksanvisning

16 Januari 2025

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025