Lorus VD67 Bruksanvisning

Läs gratis den bruksanvisning för Lorus VD67 (2 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 43 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Lorus VD67 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

NREVD67 10-2005

CAL. VD67 (RL8 SERIES)

■C H A R A C T E R I S T IC S

1. Time: Indicated by the hour, minute and

small second hands.

2. Date: Displayed in numerals.

3. Stopwatch: Measures up to 12 hours in 1/5

second increments.

•Split time measurement

Minute hand

■DISPLAY AND CROWN OPERATION

a.Normal position: Free

b.First click: Date setting

c.Second click: •Time setting

•Adjusting the stopwatch

hand position

Hour

hand

Small second

hand

A

B

a b c

Crown

D at e

S t op wa t ch

minute hand

S t op wa t ch

hour hand

S t op wa t ch

1/5-second hand

■SETTING THE TIME AND ADJUSTING

THE STOPWATCH HAND POSITION

Minute hand

Hour hand

1) Time/Calendar setting

Small second

hand

1. Pull out the crown to the first click, and turn it

clockwise until the previous day’s date

appears.

2.Pull out the crown to the second click when

the small second hand is at the 12 o’clock

position.

3.Turn the crown clockwise until the desired

date appears.

4.Turn the crown to set the hour and minute

hands.

5.Push the crown back in to the normal position

in accordance with a time signal.

Notes:

1.Do not set the date between 9:00 p.m. and

1:00 a.m., as the date may not change

properly.

2.When setting the hour hand, be sure to check

that AM/PM is correctly set. The watch is so

designed that the date changes once in 24

hours.

*Turn the hands past the 12 o’clock marker to

determine whether the watch is set for the

A.M. or P.M. period. If the date changes,

the time is set for the A.M. period. If not, the

time is set for the P.M. period.

3.When setting the minute hand, first advance

it 4 to 5 minutes ahead of the desired time

and then turn it back to the exact minute.

B

1.Pull out the crown to the second click.

2.Press button A. The stopwatch 1/5-second

hand turns a full circle.

3.Press button A repeatedly to reset the

stopwatch 1/5-second hand to the “0”

position.

4.Press button B. The stopwatch minute hand

turns a full circle.

5.Press button B repeatedly to reset the

stopwatch hour and minute hand to the “0”

position.

*The stopwatch hour hand moves

correspondingly with the stopwatch minute

hand.

*The stopwatch hands turn continuously if the

respective buttons are kept pressed, and the

hands stop when the respective buttons are

released.

6.Push the crown back in to the normal

position.

Stopwatch

hour hand

S t op wa t ch

minute hand

2) Stopwatch hand position adjustment

•If the stopwatch hands are not in the “0”

position, follow the procedure below to set

them to the “0” position.

S t op wa t ch

1/5-second hand

A

•The stopwatch can measure up to 12 hours

in 1/5 second increments.

•The measured time is indicated by the three

stopwatch hands that move independently

of the hands for time display.

•When the measurement reaches 12 hours,

the stopwatch automatically stops counting.

■S T O P WAT C H

A: Start/ Stop

B:Split/ Split

release/ Reset

S t op wa t ch

1/5-second hand

S t op wa t ch

hour hand

S t op wa t ch

minute hand

✩Before using the stopwatch, be sure to check

that the crown is set at the normal position

and that the stopwatch hands are reset to

the “0” position.

*If the hands do not return to the “0”

position, follow the procedure in “

n

SETTING THE TIME AND ADJUSTING THE

STOPWATCH HAND POSITION”.

Crown

Produktspecifikationer