Lorus W130 Bruksanvisning

Lorus Titta W130

Läs gratis den bruksanvisning för Lorus W130 (3 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 14 recensioner. Har du en fråga om Lorus W130 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Button B : Calendar (month, date and day)
display in the time/calendar display.
Start/stop in the stopwatch func-
tion.
Selection of the digits to be ad-
justed in the alarm setting func-
tion and the time/calendar set-
ting function.
Button C : Alarm display in the time/cal-
endar display.
Split/split release/reset in the
stopwatch function.
Setting the digits in the alarm
setting function and the time/
calendar setting function.
Stopping the alarm in any dis-
play.
Button
B while keeping button C pressed:
Engagement and disengagement
of the alarm and the time signal.
Button C while keeping button B pressed:
Changeover of the calendar (month
and date) display.
Buttons B & C:
Alarm test in the time/calendar
display.
C H A R A C T E R I S T I C S
1 . T i m e / c a l e n da r di s p l a y: Hour, minute,
seconds, date, day of the week and month.
2 . A u t o ma t i c c a l e n da r a dj u s t me n t : Cal-
endar adjusts automatically for odd and
even months except February of leap years.
3 . T i me i n d i c a t i o n : Changeover between
12-hour an d 24-hour indication s is pos-
sible.
4 . S t o p w a t c h : 24 hour stopwatch w ith 1/
100 second readout up to 1 hour and with
1 second readout after the first 1 hour.
Split time measurement is available.
5. Al ar m: The alarm rings at the designated
hour and minutes for 20 seconds.
6 . H ou rl y ti m e si g n a l : Can be set to ring
every hour on the hour with a single beep.
7. Il lu m ina tin g l igh t : The light illuminates
the display in the dark.
H O W T O S E T T H E D U A L C A L E N-
D A R D I S P L A Y
1 Press buttonB to show the calendar (month,
date, and day) display. The calendar dis-
play is show n while bu tton B is kept
pressed.
2 The mon th an d the da te change pla c e s
with each other with each press of button
C while keeping button B pressed.
I MNSTRUCTION ANUAL
CAL. W120 (RBZ SERIES)
CAL. W121 (RB6 SERIES)
CAL. W130 (RBN SERIES)
NREW120C 11-99
DISPLAY AND BUTTON OPERATION
Button A : Selection of the display.
The selection is made in the following order:
A
A
A
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
- - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Time/calendar display
Stopwatch display
A
Time/calendar setting Alarm setting
Press
button “A
for 2 seconds.
The design of the digital display differs
depending on the calibre. The illustra-
tions of the display shown in this manual
refer to Cal. W120.
B
C
A
L i g h t
button
Day indicator
Time signal mark Alarm mark
Seconds
MinutesHour
* In the 12-hour indication, the AM/PM mark
is displayed. In the 24-hour indication, there
is no indication.
DateMonth
Day Day
B
C
B
C
Date Month
H O W T O US E T H E S T O P W A T C H
C: Split/
Split release/
Reset
A
1/100 seconds
B: Start/Stop
Stopwatch
indicator
Split indicator
Stop indicator 1/100 second
indicator
SecondsMinutes
1 Press button A to show the stopwatch
display. (The stopwatch indicator starts
flashing.)
The stopwatch can measure up to 24 hours
and is displayed in minutes, seconds, and
1/100 seconds up to 1 hour, and in hours,
minutes, and seconds after the first 1 hour.
(The 1/100 second indicator flashes dur-
ing the first 1 hour.)
When the measurement is over 24 hours,
the stopwatc h will be reset to0:00oo
and start counting again.
2 Reset the digits to 0:00oo before using
the stopwatch. When the split and the
stopwatch indicators are flashing, press
button B to check that the stop indicator
starts flashing, and then press button C
twice to reset the digits to zero.
3 When measuring a long period of time,
return the stopwatch to the time/calendar
display after the stopwatch starts to pre-
vent any possible mistaken operation.
* When button B or C is pressed in the
stopwatch display, a single beep sounds
to confirm the operation.


Produktspecifikationer

Varumärke: Lorus
Kategori: Titta
Modell: W130

Behöver du hjälp?

Om du behöver hjälp med Lorus W130 ställ en fråga nedan och andra användare kommer att svara dig