LYYT AL2-S1612 Bruksanvisning


Läs gratis den bruksanvisning för LYYT AL2-S1612 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4.5 recensioner. Har du en fråga om LYYT AL2-S1612 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
www.avsl.com lyyt COB LED Strip Manual
24V COB LED Strip 5m - RGB
User Manual
Introduction
Multi-colour RGB COB LED Strip by Lyyt provides a continuous linear lighting solution. The
COB (chip on board) technology consists of 840 tightly packed LEDs per metre. The flexible
COB strip is supplied on a 5m reel and can be cut to desired length along the designated
cutting points, the strip is equipped with an adhesive backing for easy installation. The 24Vdc
COB strip is suitable for a wide variety of applications, such as in hospitality, retail, offices,
displays, exhibitions and more. IP20 versions are for indoor use only.
Specification
LED Colour
RGB
Voltage
24Vdc
Beam angle
120°
LED Type
Sanan
Reel Length
5m
IP Rating
IP20
Power consumption per metre
11.64W
Current
485mA per metre
LED quantity per metre
840
LED spacing
0.97 mm
Cut points
50 mm
Colour rendering index
Ra>80
Cross-secti on
10 x 2.2mm
Weight
126g
Installation of this COB Strip should be carried out by competent electrical installers, observing the
relevant electrical safety procedures. Lyyt COB Strip has a self-adhesive backing to allow it to be easily
attached to a cl n, non-porous surface. ea
Where less than 5m of tape is needed, there are solder points as shown below, where the tape may be
cut to size. These cut points are at 5 intervals. -connect to another length of tape after cuttingcm To re ,
solder a wire from “+” to “+” and a wire from G , R and B as shown below. Some accessories are


Produktspecifikationer

Varumärke: LYYT
Kategori: Inte kategoriserad
Modell: AL2-S1612

Behöver du hjälp?

Om du behöver hjälp med LYYT AL2-S1612 ställ en fråga nedan och andra användare kommer att svara dig