LYYT DIY-DW120 Bruksanvisning
LYYT
Inte kategoriserad
DIY-DW120
Läs gratis den bruksanvisning för LYYT DIY-DW120 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om LYYT DIY-DW120 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2

DIY LED TAPE KIT CW/WW –
153.739UK User Manual
DIY LED TAPE KIT 5m Cool white & Warm White –
Introduction:
Thank you for purchasing the Lyyt DIY CW/WW LED Tape. LED tape is ideal for use on the underside of a counter tops, shelves, cupboards,
around window frames or in an alcove of a ceiling to name just a few examples.
Before starting please ensure that you have read this instruction leaflet carefully.
If you are unsure about anything please have the tape installed by a competent installer.
Contents:
1 x 5m reel of CW/WW LED tape
1 x UK power adaptor
1 x Control Box with IR remote handset
Possible required tools: Scissors, Craft knife, Soldering iron and solder, 4 core DC wire and heat shrink tube.
Step 1: Preparation
Ensure the surface you are attaching to is clear of dust and dirt. Clean thoroughly and leave to dry before fitting the tape.
Step 2: Connecting IR Controller:
Connect the 4pin connector to the control box and then to the LED tape (FIG 1). Plug in the power supply and use the IR remote control to select
the various functions (Fig 2).
Unravel the tape to check that all the LEDs are functioning correctly. If there are any faults return to your retailer without delay.
FIG 1:
FIG 2:
IR remote function
The remote control has altogether 16 different colour temperatures to choose from, with other function keys as shown below:
* Fade mode: Press once for fade on both colours. Press twice for fade on cool white. Press 3 times for fade on warm whi . te
Produktspecifikationer
| Varumärke: | LYYT |
| Kategori: | Inte kategoriserad |
| Modell: | DIY-DW120 |
| Färg på produkten: | Zwart |
| Instruktioner: | Ja |
| Typ av förpackning: | Doos |
| Vormfaktor: | Rechtshandig |
| Anslutningsteknik: | Draadloos |
| Frekvensband: | 2.4 GHz |
| Typ av strömkälla: | Batterij/Accu |
| fingeravtrycksläsare: | Nee |
| Antal USB 2.0-portar: | 1 |
| Antal batterier/batterier som stöds: | 1 |
| Material: | Acrylonitrielbutadieenstyreen (ABS) |
| Avsedd för: | Pc/server |
| Plug and play: | Ja |
| Rekommenderad användning: | Thuis |
| Anslutningsområde: | 10 m |
| Bakgrundsbelysning: | Nee |
| Antal knappar: | 3 |
| Förbindelse: | RF Draadloos |
| Genvägar: | Ja |
| Numerisk knappsats: | Ja |
| Inkluderar mus: | Ja |
| Pekdon: | Nee |
| Windows-tangenter: | Ja |
| Tangentbord i full storlek: | Ja |
| Ytfärg: | Monochromatisch |
| Rulla typ: | Wiel |
| Tangentbordslayout: | QWERTY |
| Medföljande mottagare: | Ja |
| Typ av knappar: | Drukknoppen |
| Skrolla: | Ja |
| Handledsstöd: | Nee |
| Antal scrollhjul: | 1 |
| Rulla vägbeskrivningar: | Verticaal |
| Mottagare typ: | Nano-ontvanger |
| Tangentbordsknappbrytare: | Membraan keyswitch |
| Tangentbordsstorlek: | Volledige grootte (100%) |
| Stil tangentbord: | Recht |
| Tangentbordsmått (BxDxH): | 526 x 160 x 41 mm |
| Tangentbords vikt: | 615 g |
| Batteriteknik: | Alkaline |
| Batterityp: | AAA |
| Språktangentbord: | Spaans |
| Multimedia nycklar: | Ja |
| Halkskyddad marknivå: | Ja |
| Ett antal snabbtangenter: | 8 |
| Färggrupp: | Zwart |
Behöver du hjälp?
Om du behöver hjälp med LYYT DIY-DW120 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad LYYT Manualer
17 September 2024
9 September 2024
5 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Inte kategoriserad Manualer
- Livn
- Luxli
- Pylontech
- Giordani
- Panduit
- Hauck
- Beretta
- Stabo
- LD Systems
- Bryton
- V-Tone
- Meris
- Siedle
- Riviera And Bar
- Gram
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025