Makita 6915D Bruksanvisning
Makita
Slagnycklar
6915D
Läs gratis den bruksanvisning för Makita 6915D (56 sidor) i kategorin Slagnycklar. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 8 recensioner. Har du en fråga om Makita 6915D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/56
GB
Cordless Impact Wrench Instruction Manual
F
Boulonneuse sans fil Manuel d’instructions
D Akku-Schlagschrauber
Betriebsanleitung
I
Avvitatrice ad impulso a batteria
Istruzioni per l’uso
NL Snoerloze slagmoersleutel
Gebruiksaanwijzing
E Llave de impacto a batería
Manual de instrucciones
P Chave de impacto a bateria
Manual de instruções
DK Elektronisk akku slagnøgle
Brugsanvisning
S Sladdlös mutterdragare
Bruksanvisning
N Batteridrevet slagskrunøkkel
Bruksanvisning
SF Akku-iskuväännin
Käyttöohje
GR Ασύρµατο κρουστικ Οδηγίες χρήσεως
6915D
2
12
34
56
2
1
6
7
8
9
11
11
11
10
Kg.cm
1000
800
600
400
200
0
1234
M12X45
M14X45
M10X45
M14
M12
M10
8
9
11
11
11
10
Kg.cm
1000
800
600
400
200
0
1200
1234 56
M12X50
M10X45
M8X45
M12
M10
M8
4
3
5
3
ENGLISH
Explanation of general view
1 Push button
2 Battery cartridge
3 O-ring
4 Socket
5Pin
6 Switch trigger
7 Reversing switch
8 Fastening torque
9 Fastening time
10 Seconds
11 Proper fastening torque for
SPECIFICATIONS
Model 6915D
Capacities
Standard bolt ............................................... M8 – M14
High tensile bolt ........................................... M6 – M12
Square drive ..................................................... 12.7 mm
No load speed (min
–1
) ..................................... 0 – 1,800
Impacts per minute .......................................... 0 – 2,500
Max. fastening torque ....................................... 117 N•m
Overall length .................................................... 221 mm
Net weight (with battery cartridge) ....................... 1.9 kg
Rated voltage .................................................. D.C. 12 V
• Due to our continuing program of research and deve-
lopment, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for fastening bolts and nuts.
Safety Hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
ENC004-1
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Always cover the battery terminals with the bat-
tery cover when the battery cartridge is not
used.
6. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
7. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
8. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
9. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tempera-
ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-
tery cartridge cool down before charging it.
4. Charge the Nickel Metal Hydride battery car-
tridge when you do not use it for more than six
months.
ADDITIONAL SAFETY RULES FOR TOOL
ENB025-1
1. Be aware that this tool is always in an operating
condition, because it does not have to be
plugged into an electrical outlet.
2. Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring. Contact with a “live”
wire will also make exposed metal parts of the
tool “live” and shock the operator.
3. Wear ear protectors.
4. Check the socket carefully for wear, cracks or
damage before installation.
5. Hold the tool firmly.
6. Always be sure you have a firm footing.
7. Be sure no one is below when using the tool in
high locations.
8. The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Slagnycklar |
| Modell: | 6915D |
Behöver du hjälp?
Om du behöver hjälp med Makita 6915D ställ en fråga nedan och andra användare kommer att svara dig
Slagnycklar Makita Manualer
9 Januari 2025
12 Oktober 2024
1 Augusti 2024
1 Augusti 2024
1 Augusti 2024
1 Augusti 2024
31 Juli 2024
31 Juli 2024
31 Juli 2024
31 Juli 2024
Slagnycklar Manualer
Nyaste Slagnycklar Manualer
19 Oktober 2024
11 Oktober 2024
1 Augusti 2024
1 Augusti 2024
30 Juli 2024
28 Juli 2024
28 Juli 2024
25 Juli 2024
25 Juli 2024
24 Juli 2024