Makita CC301DWAE Bruksanvisning
Makita
Skärmaskin
CC301DWAE
Läs nedan 📖 manual på svenska för Makita CC301DWAE (12 sidor) i kategorin Skärmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
INSTRUCTION MANUAL
Cordless Cutter
CC301D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: CC301D
Diamond wheel diameter 85 mm
Max. wheel thickness 0.8 mm
Max. Cutting depth at 0° bevel 25.5 mm
at 45° bevel 16.5 mm
Rated speed 1,500 min-1
Rated voltage D.C. 10.8 V
Battery cartridge BL1015, BL1020B BL1040B
Overall length 313 mm 331 mm
Net weight 1.8 kg 1.9 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting in glass and masonry
materials with a diamond wheel and water.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA ) : 84 dB(A)
Sound power level (LWA) : 95 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: concrete cutting
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EU declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
3 ENGLISH
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriateconditionswillreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.Looseclothes,jewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
1. Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
onetypeofbatterypackmaycreateariskofre
when used with another battery pack.
2. Use power tools only with specically desig-
nated battery packs. Use of any other battery
packsmaycreateariskofinjuryandre.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nalstogethermaycauseburnsorare.
4.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejectedfromthebatterymaycauseirritationorburns.
Service
1. Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
2. Follow instruction for lubricating and chang-
ing accessories.
3. Keep handles dry, clean and free from oil and
grease.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Skärmaskin |
| Modell: | CC301DWAE |
Behöver du hjälp?
Om du behöver hjälp med Makita CC301DWAE ställ en fråga nedan och andra användare kommer att svara dig
Skärmaskin Makita Manualer
8 September 2024
2 September 2024
30 Augusti 2024
25 Augusti 2024
23 Augusti 2024
22 Augusti 2024
21 Augusti 2024
20 Augusti 2024
19 Augusti 2024
16 Augusti 2024
Skärmaskin Manualer
- Skärmaskin Electrolux
- Skärmaskin Bosch
- Skärmaskin Kenwood
- Skärmaskin Quigg
- Skärmaskin Unold
- Skärmaskin Tefal
- Skärmaskin Ade
- Skärmaskin Ambiano
- Skärmaskin Ariete
- Skärmaskin Bartscher
- Skärmaskin Toolland
- Skärmaskin Orbegozo
- Skärmaskin Princess
- Skärmaskin Brother
- Skärmaskin Ozito
- Skärmaskin Gude
- Skärmaskin Fagor
- Skärmaskin Severin
- Skärmaskin Gorenje
- Skärmaskin Silvercrest
- Skärmaskin FAC
- Skärmaskin Korona
- Skärmaskin Saturn
- Skärmaskin Black And Decker
- Skärmaskin Tristar
- Skärmaskin Domo
- Skärmaskin Trisa
- Skärmaskin Livoo
- Skärmaskin Skil
- Skärmaskin OK
- Skärmaskin Hyundai
- Skärmaskin Bestron
- Skärmaskin Oster
- Skärmaskin ECG
- Skärmaskin Jata
- Skärmaskin Melissa
- Skärmaskin Magic Chef
- Skärmaskin Swan
- Skärmaskin Clatronic
- Skärmaskin Fritel
- Skärmaskin Russell Hobbs
- Skärmaskin Sencor
- Skärmaskin Cuisinart
- Skärmaskin Festool
- Skärmaskin Blaupunkt
- Skärmaskin Concept
- Skärmaskin Sunbeam
- Skärmaskin Hikoki
- Skärmaskin Dremel
- Skärmaskin Ernesto
- Skärmaskin Beper
- Skärmaskin Hendi
- Skärmaskin Heinner
- Skärmaskin Eldom
- Skärmaskin Philco
- Skärmaskin Trebs
- Skärmaskin Mach
- Skärmaskin H.Koenig
- Skärmaskin Perel
- Skärmaskin GOTIE
- Skärmaskin Beem
- Skärmaskin Exquisit
- Skärmaskin Proline
- Skärmaskin Zelmer
- Skärmaskin Nutrichef
- Skärmaskin Genius
- Skärmaskin ETA
- Skärmaskin Bomann
- Skärmaskin Powerplus
- Skärmaskin Graef
- Skärmaskin Ufesa
- Skärmaskin Rommelsbacher
- Skärmaskin Wilfa
- Skärmaskin Presto
- Skärmaskin Boss
- Skärmaskin Camry
- Skärmaskin Sammic
- Skärmaskin Bifinett
- Skärmaskin Primo
- Skärmaskin Clas Ohlson
- Skärmaskin Gastroback
- Skärmaskin Powerfix
- Skärmaskin Saro
- Skärmaskin MPM
- Skärmaskin Rotel
- Skärmaskin Ices
- Skärmaskin Hobart
- Skärmaskin RGV
- Skärmaskin Team
- Skärmaskin ProfiCook
- Skärmaskin Nevir
- Skärmaskin CaterChef
- Skärmaskin G3 Ferrari
- Skärmaskin Magimix
- Skärmaskin Efbe-schott
- Skärmaskin Gourmetmaxx
- Skärmaskin Makeblock
- Skärmaskin Turmix
- Skärmaskin Ritter
- Skärmaskin OXO
- Skärmaskin Cigweld
- Skärmaskin Nesco
- Skärmaskin Waves
- Skärmaskin Coline
- Skärmaskin JAC
- Skärmaskin De Buyer
- Skärmaskin Cecotec
- Skärmaskin Maruyama
- Skärmaskin RIDGID
- Skärmaskin Kalorik
- Skärmaskin Westfalia
- Skärmaskin Brandson
- Skärmaskin Mia
- Skärmaskin Khind
- Skärmaskin Gastronoma
- Skärmaskin Rösle
- Skärmaskin Globe
- Skärmaskin Riviera And Bar
- Skärmaskin Venga
- Skärmaskin Domoclip
- Skärmaskin Emga
- Skärmaskin Baker's Mark
- Skärmaskin Avantco
- Skärmaskin Kogan
- Skärmaskin Wolfcraft
- Skärmaskin Esperanza
- Skärmaskin PowerTec Kitchen
- Skärmaskin Panduit
- Skärmaskin Thane
- Skärmaskin Berkel
- Skärmaskin Louis Tellier
- Skärmaskin GARDE
- Skärmaskin Pro-Cut
- Skärmaskin Bifinet
- Skärmaskin Jokari
- Skärmaskin Kleva
- Skärmaskin Bron-Coucke
- Skärmaskin Enkho
- Skärmaskin Backyard Pro Butcher Series
- Skärmaskin Prince Castle
- Skärmaskin Boska
- Skärmaskin Borner
- Skärmaskin Backyard Pro
- Skärmaskin Royal Catering
- Skärmaskin Tescoma
- Skärmaskin Prowork
- Skärmaskin Weston
- Skärmaskin Ovela
- Skärmaskin Logan
Nyaste Skärmaskin Manualer
27 Mars 2025
27 Mars 2025
18 Februari 2025
13 Februari 2025
10 Februari 2025
8 Februari 2025
1 Februari 2025
31 Januari 2025
7 Januari 2025
6 Januari 2025