Makita DHS900Z Bruksanvisning

Makita Sågmaskin DHS900Z

Läs gratis den bruksanvisning för Makita DHS900Z (28 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 11 recensioner. Har du en fråga om Makita DHS900Z eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/28

INSTRUCTION MANUAL

Cordless Circular Saw

DHS900

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHS900

Blade diameter 235 mm

Max. Cutting depth at 0° 85 mm

at 45° bevel 61 mm

at 60° bevel 44 mm

No load speed 4,500 min-1

Overall length 413 mm

Rated voltage D.C. 36 V

Net weight 5.3 - 6.0 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

and Waste Batteries and Accumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

Thetoolisintendedforperforminglengthwaysand

crosswaysstraightcutsandmitercutswithanglesin

woodwhileinrmcontactwiththeworkpiece.With

appropriate Makita genuine saw blades, other materials

can also be sawed.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-5:

Soundpressurelevel(L

pA):93dB(A)

Soundpowerlevel(L

WA):104dB(A)

Uncertainty(K):3dB(A)

NOTE:Thedeclarednoiseemissionvalue(s)has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE:Thedeclarednoiseemissionvalue(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

3 ENGLISH

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841-2-5:

Work mode: cutting wood

Vibrationemission(a

h,W):2.5m/s2 or less

Uncertainty(K):1.5m/s

Work mode: cutting metal

Vibrationemission(a

h,M ):2.5m/s2 or less

Uncertainty(K):1.5m/s

NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during

actual use of the power tool can dier from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical devices

should contact the maker of their device and/or doctor

for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attachedtoarotatingpartofthepowertoolmay

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Sågmaskin
Modell:	DHS900Z

Behöver du hjälp?

Om du behöver hjälp med Makita DHS900Z ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Sågmaskin Makita Manualer

Makita DPC6430 Bruksanvisning

1 April 2025

Makita DCS4610 Bruksanvisning

1 April 2025

Makita DCS431 Bruksanvisning

1 April 2025

Makita DCS430 Bruksanvisning

1 April 2025

Makita EK6101 Bruksanvisning

1 April 2025

Makita DCS6401 Bruksanvisning

1 April 2025

Makita DCS340 Bruksanvisning

29 Mars 2025

Makita DPB181 Bruksanvisning

29 Mars 2025

Makita DPC7301 Bruksanvisning

29 Mars 2025

Makita DPC6401 Bruksanvisning

29 Mars 2025

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Bavaria By Einhell BHS 66 Bruksanvisning

3 April 2025

Bavaria By Einhell BPS 600 E Bruksanvisning

3 April 2025

Kraftronic KT-ST 550 Bruksanvisning

29 Mars 2025

Kraftronic KT-US 650 Bruksanvisning

29 Mars 2025

Kraftronic KT-HK 1250 Bruksanvisning

29 Mars 2025

Kraftronic KT-HK 1410 Bruksanvisning

29 Mars 2025

Topex 16B282 Bruksanvisning

29 Mars 2025

Ribimex PRS499 Bruksanvisning

29 Mars 2025

Stanley Fatmax SFMCCS630 Bruksanvisning

29 Mars 2025

Einhell BT-SM 3100 Bruksanvisning

28 Mars 2025