Makita DSC102ZJ Bruksanvisning

Makita Skärmaskin DSC102ZJ

Läs gratis den bruksanvisning för Makita DSC102ZJ (16 sidor) i kategorin Skärmaskin. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om Makita DSC102ZJ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

INSTRUCTION MANUAL

Cordless Threaded Rod Cutter

DSC102

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DSC102

Cutting capacities Mild steel W3/8, M10, M8, M6

Stainless steel W3/8, M8, M6

Overall length 199 mm

Rated voltage D.C. 18 V

D.C. 14.4 V

Net weight 2.8 - 3.2 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge D.C.14.4 V Model BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B

D.C.18 V Model BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingshowthesymbolsusedfortheequipment.

Besurethatyouunderstandtheirmeaningbeforeuse.

Read instruction manual.

Wearsafetyglasses.

Do not touch the cutting dice during

operation.

Payattentiontoacutthreadedrod.

Donotcloseyourfacetothetoolduring

operation.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

and Waste Batteries and Accumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for cutting threaded rods.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841:

Soundpressurelevel(L

pA):71dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841:

Workmode:cuttingthreadedstainlesssteelrod(rod

sizeW3/8)

Vibrationemission(a

h):2.5m/s

2 or less

Uncertainty(K):1.5m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared vibration emission value

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING:

The vibration emission during actual

use of the power tool can differ from the declared emission

valuedependingonthewaysinwhichthetoolisused.

WARNING:Besuretoidentifysafetymeasures

to protect the operator that are based on an estima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

the times when the tool is switched off and when it is

runningidleinadditiontothetriggertime).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attachedtoarotatingpartofthepowertoolmay

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

ofthepowertoolinunexpectedsituations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Skärmaskin
Modell:	DSC102ZJ

Behöver du hjälp?

Om du behöver hjälp med Makita DSC102ZJ ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Skärmaskin Makita Manualer

Makita WST05 Bruksanvisning

8 September 2024

Makita CC300DZ Bruksanvisning

2 September 2024

Makita UR101CZ Bruksanvisning

30 Augusti 2024

Makita CC301DZ Bruksanvisning

25 Augusti 2024

Makita EBH252U Bruksanvisning

23 Augusti 2024

Makita DUR368APT2 Bruksanvisning

22 Augusti 2024

Makita DSC102ZJ Bruksanvisning

21 Augusti 2024

Makita DSC251ZK Bruksanvisning

20 Augusti 2024

Makita DCO180Z Bruksanvisning

19 Augusti 2024

Makita JN1601 Bruksanvisning

16 Augusti 2024

Skärmaskin Manualer

Nyaste Skärmaskin Manualer

Logan 350-1 Bruksanvisning

27 Mars 2025

Logan Artist Elite 450-1 Bruksanvisning

27 Mars 2025

Weston 01-0008-W Bruksanvisning

18 Februari 2025

Maruyama M42BK-QC Bruksanvisning

13 Februari 2025

Royal Catering RCAM-220PRO Bruksanvisning

10 Februari 2025

Graef Concept 25 Bruksanvisning

8 Februari 2025

Graef SKS 850 Bruksanvisning

1 Februari 2025

Royal Catering RCGT-1 Bruksanvisning

31 Januari 2025

Genius Nicer Dicer Quick Bruksanvisning

7 Januari 2025

Ovela OVSAFSLCERA Bruksanvisning

6 Januari 2025