Makita HP001GD102 Bruksanvisning
Makita
Borrmaskin
HP001GD102
Läs gratis den bruksanvisning för Makita HP001GD102 (16 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Makita HP001GD102 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
INSTRUCTION MANUAL
Cordless Hammer Driver Drill
HP001G
ENGLISH: Original instructions
IMPORTANT: Read Before Using.
2 ENGLISH
SPECIFICATIONS
Model: HP001G
Drilling capacities Masonry 20 mm
Steel 20 mm
Wood Auger bit: 50 mm
Self-feed bit: 76 mm
Hole saw: 152 mm
Fastening capacities Wood screw 10 mm x 90 mm
Machine screw M6
No load speed (RPM) High (2) 0 - 2,600 min
-1
Low (1) 0 - 650 min
-1
Blows per minute High (2) 0 - 39,000 min
-1
Low (1) 0 - 9,750 min
-1
Overall length 182 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 2.7 - 3.0 kg
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for impact drilling in brick, brickwork
and masonry. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (L
pA
) : 85 dB(A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Borrmaskin |
| Modell: | HP001GD102 |
Behöver du hjälp?
Om du behöver hjälp med Makita HP001GD102 ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin Makita Manualer
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
Borrmaskin Manualer
- Baumr-AG
- Sthor
- Hazet
- Laserliner
- Max Bahr
- Hikoki
- Hitachi
- Fieldmann
- Stalco
- Verto
- Gamma
- Tryton
- Narex
- Parkside
- Powerplus
Nyaste Borrmaskin Manualer
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025