Makita M8101 Bruksanvisning
Makita
Borrmaskin
M8101
Läs gratis den bruksanvisning för Makita M8101 (36 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 2 recensioner. Har du en fråga om Makita M8101 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
GB Hammer Drill Instruction Manual
F Perceuse à Percussion Manuel d’instructions
D Schlagbohrmaschine Betriebsanleitung
I Trapano a percussione Istruzioni per l’uso
NL Hamerboor Gebruiksaanwijzing
E Rotomartillo Manual de instrucciones
P Furadeira de Impacto Manual de instruções
DK Borehammer Brugsanvisning
GR Κρουστικό τρυπάνι Οδηγίες χρήσεως
TR Darbeli matkap Kullanma kılavuzu
M8100
M8101
2
1 2
3 4
5 6
7 8
4
1
2
3
56
7
8
9
10
12
1
11
13
14
15
A
B
16
011089 011090
011095 011091
011092 011093
011094 015487
3
ENGLISH (Original instructions)
Explanation of general view
1 Grip base
2 Teeth
3 Side grip (auxiliary handle)
4 Protrusion
5 Loosen
6 Tighten
7 Drill chuck
8 Chuck key
9 Sleeve
10 Ring
11 Side grip
12 Depth gauge
13 Switch trigger
14 Lock button
15 Reversing switch lever
16 Action mode changing lever
SPECIFICATIONS
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
GEB003-5
HAMMER DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly with both hands.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
ASSEMBLY
Installing side grip (auxiliary handle) (Fig. 1)
CAUTION:
• Always be sure that the tool is switched off and
unplugged before installing or removing the side grip.
Always use the side grip to ensure operating safety.
Install the side grip so that the teeth on the grip fit in
between the protrusions on the tool barrel. Then tighten
the grip by turning clockwise at the desired position. It
may be swung 360° so as to be secured at any position.
Model M8100 M8101
Capacities
Concrete 16 mm
Wood 30 mm
Steel 13 mm
No load speed (min–1 ) 0 – 3,200
Blows per minute 0 – 48,000
Overall length 296 mm 295 mm
Net weight 2.1 kg 2.0 kg
Safety class /II
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Borrmaskin |
| Modell: | M8101 |
Behöver du hjälp?
Om du behöver hjälp med Makita M8101 ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin Makita Manualer
13 Juni 2025
13 Juni 2025
13 Juni 2025
1 April 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
27 Mars 2025
Borrmaskin Manualer
- IKEA
- Tryton
- Blucave
- Ecomac
- Goon
- Profitech
- Vonroc
- Clas Ohlson
- Hilti
- Herkules
- Hikoki
- Netter Vibration
- Hazet
- Max
- Silverline
Nyaste Borrmaskin Manualer
12 Juni 2025
7 Juni 2025
7 Juni 2025
3 Juni 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
1 April 2025
30 Mars 2025