Makita RP1800 Bruksanvisning

Makita fräsmaskin RP1800

Läs gratis den bruksanvisning för Makita RP1800 (16 sidor) i kategorin fräsmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 2 recensioner. Har du en fråga om Makita RP1800 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Router

RP1800

RP1800F

RP1801

RP1801F

RP2300FC

RP2301FC

009852

ENGLISH

SPECIFICATIONS

Model

RP1800 /

RP1800F

RP1801 /

RP1801F

RP2300FC RP2301FC

Collet chuck capacity 12 mm or 1/2"

Plunge capacity 0 - 70 mm

No load speed (min

-1

) 22,000 9,000 - 22,000

Overall length 312 mm

Net weight 6.0 kg 6.1 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE010-1

Intended use

The tool is intended for flush trimming and profiling of

wood, plastic and similar materials.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model RP1800

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.40 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

For Model RP1800F

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.39 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

For Model RP1801

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.38 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

Produktspecifikationer

Varumärke:	Makita
Kategori:	fräsmaskin
Modell:	RP1800
Vikt:	6078 g
Höjd:	298.45 mm
Tomgångsvarvtal (max):	22000 RPM
Justerbar hastighet:	Nej
Produktens färg:	Black, Green
Vikt inkl. förpackning:	8618.255 g
Strömkälla:	AC
Inbyggd ljus:	Nej
Dammutsugningsport:	Nej
Chuck-kapacitet:	6.35 (1/4"), 12.7 (1/2")
Strömstyrka:	15 A
Typ av bas för handöverfräs/kantfräs:	Fast bas