Makita RT001GZ16 Bruksanvisning
Makita
fräsmaskin
RT001GZ16
Läs gratis den bruksanvisning för Makita RT001GZ16 (36 sidor) i kategorin fräsmaskin. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Makita RT001GZ16 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
INSTRUCTION MANUAL
Cordless Trimmer
RT001G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: RT001G
Collet chuck capacity 6 mm, 8 mm, or 1/4″
No load speed 10,000 - 31,000 min
-1
Overall height with BL4025 245 mm
with BL4040 251 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 2.2 - 2.5 kg
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025 / BL4040
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for ush trimming and proling of
wood, plastic and similar materials.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-17:
Work mode: rotation without load
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | fräsmaskin |
| Modell: | RT001GZ16 |
Behöver du hjälp?
Om du behöver hjälp med Makita RT001GZ16 ställ en fråga nedan och andra användare kommer att svara dig
fräsmaskin Makita Manualer
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
fräsmaskin Manualer
- Bosch
- Black Decker
- Milwaukee
- Draper
- Toolson
- Könner & Söhnen
- Worx
- Eibenstock
- Skil
- Stihl
- Verto
- Greenworks
- Flex
- Holzmann
- Craftsman
Nyaste fräsmaskin Manualer
13 Oktober 2025
8 Oktober 2025
5 Oktober 2025
4 Oktober 2025
30 September 2025
28 September 2025
26 September 2025
26 September 2025
25 September 2025
20 September 2025